|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-17-2012, 12:58 PM | #1 |
Junior Member
Join Date: Jan 2011
Posts: 18
|
'42-'48 Lincoln Front brake help
Ok, I have searched this site high and low and can not find an answer to my problem. I have a set of '42-'48 lincoln front brakes and I would like to remove the hub from the drum for media blasting. However, I can not get them to come loose, is there some trick that I am missing? Please help.
|
04-17-2012, 02:11 PM | #2 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
|
Re: '42-'48 Lincoln Front brake help
Leave it on.
The wheel studs are "swedged" in place, effectively rivetting the drum to the hub. If the parts are serviceable and all you want to do is clean them, just leave them alone and treat it as a one piece part. NB I am assuming Lincoln are same type of assembly as a Ford. Mart. |
Sponsored Links (Register now to hide all advertisements) |
|
04-17-2012, 02:27 PM | #3 |
Junior Member
Join Date: Jan 2011
Posts: 18
|
Re: '42-'48 Lincoln Front brake help
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|