The Ford Barn

Scott H in Wheaton · 03-17-2013, 08:38 PM

I'm looking for a repair panel for the back of my 36 pickup cab to go from the upper body line down, not just the little 4"-6" repair patch I see offered.

I checked Mack Hils, Macks, and Northern.

Any other ideas out there?

The front of the bed was pushed into the cab, denting the cab and I also have some rust through.

Lawson Cox · 03-17-2013, 10:29 PM

Buy the patch panel and a piece of flat steel to finish up the back of the cab.

don35 · 03-19-2013, 11:27 AM

Sponsored Links (Register now to hide all advertisements)

I had a piece made at my local sheet metal shop. They were even able to put the "bubble" at the bottom with a computerized break!

03-17-2013, 08:38 PM	#1
Scott H in Wheaton Senior Member Join Date: Dec 2012 Location: Wheaton, IL near Chicago Posts: 861	36 pickup cab back panel I'm looking for a repair panel for the back of my 36 pickup cab to go from the upper body line down, not just the little 4"-6" repair patch I see offered. I checked Mack Hils, Macks, and Northern. Any other ideas out there? The front of the bed was pushed into the cab, denting the cab and I also have some rust through.

03-17-2013, 10:29 PM	#2
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 36 pickup cab back panel Buy the patch panel and a piece of flat steel to finish up the back of the cab. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

03-19-2013, 11:27 AM	#3
don35 Member Join Date: Mar 2012 Location: Minnesota Posts: 53	Re: 36 pickup cab back panel Sponsored Links (Register now to hide all advertisements) I had a piece made at my local sheet metal shop. They were even able to put the "bubble" at the bottom with a computerized break!