The Ford Barn

Jim · 04-22-2014, 04:52 PM

What kind of tool is needed to remove the valve guide retainers. Also are there any laying around that a man could buy? Thanks Jim

Bassman/NZ · 04-22-2014, 05:47 PM

Sponsored Links (Register now to hide all advertisements)

I made a hook out of some steel rod, bent a 90 degree in one end and ground the tip down until a nice fit in the retainer hole. Cost= zilch.

04-22-2014, 04:52 PM	#1
Jim Senior Member Join Date: May 2010 Location: Alto, Tx. Posts: 299	Valve guide retainers What kind of tool is needed to remove the valve guide retainers. Also are there any laying around that a man could buy? Thanks Jim

04-22-2014, 05:47 PM	#2
Bassman/NZ Senior Member Join Date: May 2010 Location: Napier, New Zealand Posts: 2,001	Re: Valve guide retainers Sponsored Links (Register now to hide all advertisements) I made a hook out of some steel rod, bent a 90 degree in one end and ground the tip down until a nice fit in the retainer hole. Cost= zilch.