|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-18-2024, 07:05 AM | #1 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Car Is Shrinking........
......or I'm getting too big for my '28 Sport Coupe! I bought this car 3 years ago and I was able to drive it, but somehow over the winter, I no longer fit. I have put on some weight I know. The problem seems to be when I have the car in low gear there is not enough room to move my foot off the accelerator and to the brake. Same boots as last year. I don't get it. Anyone else have trouble fitting operating the pedals? I think driving my '26 T is definitely out of the question! I haven't driven either one since last June and now it sort of scares me to drive them now. Just doesn't seem safe.....
|
04-18-2024, 07:17 AM | #2 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,923
|
Re: Car Is Shrinking........
Some people have modified their cars to add a few inches to the driver's compartment. I think there is a way to move the seat back but I saw at least one car where the body was modified. An expensive and time consuming project, no doubt.
I have a super 8 movie of my grandpa getting in my 30 coupe that I drove in high school. It was a struggle for him. I am now at his age when the movie was taken and it is little struggle to get in and out of my Model A. For me it helps to keep some weight off by exercise and reducing the caloric intake. One idea is to sell your Model A and T and buy a larger car. Maybe a Lincoln.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. Last edited by nkaminar; 04-18-2024 at 07:23 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-18-2024, 07:22 AM | #3 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
I have seen a factory Service Bulletin about moving or modifying the seat somewhat for one model or another. The big problem I think I am facing is that the gearshift is just too close.
|
04-18-2024, 07:38 AM | #4 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,827
|
Re: Car Is Shrinking........
Our 1929 Sport Coupe we owned for 42 years. Reluctantly sold it two years ago for the reasons you have mentioned.
I really loved that car but I no longer was able to easily get in or out. Plus I was very much concerned about working the pedals and safely driving in todays traffic. I had gotten to the point were I was just enjoying the car while setting in the garage having a cold summer drink. A number of my friends have also decided to sell their cars. Age and health problems. Enjoy your car and life while you can. |
04-18-2024, 07:46 AM | #5 | |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
Quote:
|
|
04-18-2024, 07:53 AM | #6 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,848
|
Re: Car Is Shrinking........
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
04-18-2024, 08:05 AM | #7 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
I have heard of that modification. I guess it is a possibility. Wonder if I have to take the transmission out to do that?
|
04-18-2024, 08:09 AM | #8 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 305
|
Re: Car Is Shrinking........
I did the same thing, my shifter was clocked at about 7 O'clock when I got my Roadster. I bent it to 6 O'clock and now it's perfect.
I did it with the shifter still attached and in the car. |
04-18-2024, 08:21 AM | #9 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
|
04-18-2024, 08:30 AM | #10 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 305
|
Re: Car Is Shrinking........
Here is how I did it. I'm not saying it was the best way. But it worked well and did no damage.
I put it in 1st gear, sat in the car, and planned out how far I wanted to twist it to the right. Next I removed the shift knob and wrapped shop rags tightly around the shifter and bound them with masking tape to protect the shifter. Next I removed the handle from my floor jack (long steel tube) and slid it over the shifter. Then I took my left hand and placed it at the bottom of the shifter to hold the tube where the bend in the shifter is. I took my right hand and placed it at the top of the tube and started to lightly push in the direction I wanted it to bend. It did not require a great deal of force. I would only slightly bend it, remove the tube, and test the position. I did that until I got it where it was comfortable. |
04-18-2024, 08:48 AM | #11 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
I think that's my only issue. Sure, I'm 6' and 280, but I can drive the car even though it's cramped, but for some reason suddenly I can't feel safe with the shifter being this close & I can't move my right foot. Is there any danger of hurting anything in the transmission?
|
04-18-2024, 08:56 AM | #12 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,100
|
Re: Car Is Shrinking........
The shift tower will come off easily without removing the transmission. It does take a special tool to safely remove the shift lever from the tower, though. That way you can grab onto the lower portion of the shift lever in a vise while you bend the upper. I would remove the cup from the lever and hold onto the lever above where the cup mounts, that way you won’t bend how the cup goes over the tower casting. Look at where Y-B bent his.
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
04-18-2024, 09:10 AM | #13 |
Senior Member
Join Date: Apr 2011
Location: Davenport, Iowa
Posts: 2,127
|
Re: Car Is Shrinking........
Try removing some padding from the front seat. That will lower the height enough to make it easier to get in an out. Older LeBaron Bonney interior kits ended up being too high in this area if you used all the padding they included in the kit. Although more work, you could also pull some padding out of the backrest, which will increase room even more and make entry and exit moves easier.
Marshall |
04-18-2024, 09:19 AM | #14 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,848
|
Re: Car Is Shrinking........
Quote:
Place the shifter thru the eye bolts and slide down so the lower eye bolt is just above the bend in the shifter. Wrap some tape around the eye bolts so you don't mar the shifter. Tighten the large nut in the middle. I use the tool because I was concerned of putting too much stress on the internals by just bending it. But others have just bent it without issues. Last edited by Y-Blockhead; 04-18-2024 at 07:08 PM. |
|
04-18-2024, 10:42 AM | #15 | |
Senior Member
Join Date: May 2010
Posts: 2,604
|
Re: Car Is Shrinking........
Quote:
Seat can be moved 1 inch and 5/8ths towards front or rear from "Standard" position. I moved SEAT BACK to the rear on both upper and lower. Later I made a bracket to move lower seat-back even further to the rear. CAUTION: If you have Mitchell transmission, DO NOT try to bend shifter stick without heating it. These shifters are made in two pieces and only spot welded together. The other version are two pieces and threaded together. I am not picking on Mitchell I have seen both versions of shift levers made as REPRO levers in recent years. Mine broke in half just below the "Chrome Dome" while driving. The weld only penatrated about .060 to .070. Luckily it broke in second gear and close to the garage. Last edited by Benson; 04-18-2024 at 01:04 PM. |
|
04-18-2024, 12:20 PM | #16 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 592
|
Re: Car Is Shrinking........
Someone would make a fortune if they made a Model A steering wheel that was 3" smaller in diameter.
|
04-18-2024, 12:26 PM | #17 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
|
04-18-2024, 01:22 PM | #18 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,993
|
Re: Car Is Shrinking........
One of the guys that was formerly in our local club took 1 1/2 to 2" out of his clutch and brake pedals, then welded them back together.
|
04-18-2024, 02:17 PM | #19 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,808
|
Re: Car Is Shrinking........
why not wear sneakers instead of boots?
|
04-18-2024, 02:44 PM | #20 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,827
|
Re: Car Is Shrinking........
|
04-18-2024, 03:16 PM | #21 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
I might try that. The problem I have is that I have such flat arches that the I the only thing that works for me is boots. I'd be fine in sneakers as long as I'm driving, but if I had to get out to walk, after about half an hour my back would be screaming at me!
|
04-18-2024, 04:19 PM | #22 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,993
|
Re: Car Is Shrinking........
For years I had a pair of low profile sneakers I'd make a point to wear when driving my car.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-18-2024, 05:57 PM | #23 |
Senior Member
Join Date: May 2010
Location: Burton, Texas
Posts: 683
|
Re: Car Is Shrinking........
I'm 89 years old and 5 feet, 9 inches tall. My oldest son gave me several car cushions that are about 3 inches thick. On my '28 and '34 roadsters I step on the running boards and slip into the driver's seat. Then I slip a cushion under my butt. It is quite comfortable for me to drive this way but difficult and uncomfortable without the cushion. I do the same thing with my '22 roadster except that I use 2 cushions. I only drive these cars on the rural roads in my area.
|
04-18-2024, 07:03 PM | #24 |
Senior Member
Join Date: Oct 2014
Location: Central New Jersey
Posts: 416
|
Re: Car Is Shrinking........
Great thread... My wife and grandkids laugh..."Pop drives in his his socks". Yep, as soon as I get in the Roadster, off comes my footwear, sneakers or shoes or boots,,,,I can't navigate the pedals fast enough unless I'm footloose and fancy free!
Nice to know we are all in the same boat...Funny but serious...Again great post thanks. |
04-18-2024, 08:58 PM | #25 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 592
|
Re: Car Is Shrinking........
|
04-18-2024, 09:02 PM | #26 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 592
|
Re: Car Is Shrinking........
Sponsored Links (Register now to hide all advertisements)
|
04-18-2024, 09:51 PM | #27 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,997
|
Re: Car Is Shrinking........
Legroom or seat room is not a problem for me in an A.My problem is my shoulders.I can only drive a closed A with the window up for a very short time.I have to have my arms out from my sides,so the left arm has to go out the window.Doing the kinds of work I've done all my life has left me with some weird shoulder socket configurations.There is no way a set of handcuffs can be put on me without dislocating one shoulder.I need two sets.I have a nice 28 phaeton that I am going to get rid of because it is so hard for me to drive.That left side parking brake is a constant pain on my left leg and knee.Probably the A with the most comfortable sitting and driving position for me is my 30 RPU.Right arm up holding the wheel,left arm resting on the door top,and my legs just seem to fit.
|
04-19-2024, 06:36 AM | #28 |
Senior Member
Join Date: May 2010
Location: Burton, Texas
Posts: 683
|
Re: Car Is Shrinking........
Keith, That's interesting, I sold my early OCPU in March last year for the same reason that you sold your Phaeton. The guy I sold it to calls me once in a while but has never complained about this.
|
04-19-2024, 07:57 AM | #29 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,808
|
Re: Car Is Shrinking........
I might try that. The problem I have is that I have such flat arches that the I the only thing that works for me is boots. I'd be fine in sneakers as long as I'm driving, but if I had to get out to walk, after about half an hour my back would be screaming at me!
you obviously havent had a decent pair of sneakers. go buy yourself some New Balance sneaks.......... great arches. I was in the shoe biz in a previous lifetime. |
04-19-2024, 08:15 AM | #30 | |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 905
|
Re: Car Is Shrinking........
Quote:
|
|
04-19-2024, 08:50 AM | #31 | |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
Quote:
|
|
04-19-2024, 09:03 AM | #32 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,100
|
Re: Car Is Shrinking........
I had to sell my ‘30 CCPU when my wife could no longer negotiate into the passenger seat after her hip replacement. Got the Town Sedans because I could push the front seat back. Better for her, and at the same time helped me with the additional legroom. However, the coolant heater in my ‘31 is mounted to the left of the steering column and constricts foot access to the clutch pedal, especially with boots on. Trade offs I guess.
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
04-19-2024, 09:42 AM | #33 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,997
|
Re: Car Is Shrinking........
Years ago I was on my way into town,and the local PD was on traffic detail at a water line repair.The officer looked at me,did a double take,and pointed for me to pull over and park off to the side.He started lecturing,we've given you breaks time after time,and you just crap on our faces in return.Turn around.He found my shoulders wouldn't cooperate to put the cuffs on.I told him he needed two sets,so he got out another set.He called for transport,and the chief showed up in a couple of minutes.THAT AIN'T Ronnie! They asked why I didn't say anything,but the truth was I knew something was wrong,and something in me wanted to see how far it would go before the detail cop realized it. A friend that looks as scruffy as I do had been caught sneaking around town without a license.They spanked him,sent him home,and told him to cool it.(he did)It didn't help that we drove identical blue Toyota pickups.
|
04-19-2024, 10:39 AM | #34 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: Car Is Shrinking........
I had the same problem. I'm 6'1" and 215 lbs. So, I bought a V8 Ford and it solved the problem.
|
04-19-2024, 11:17 AM | #35 |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
|
04-19-2024, 12:41 PM | #36 | |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,827
|
Re: Car Is Shrinking........
Quote:
It’s like your baby cup. You may not be able to still use or need it, but the item represents something you will never get back. Your Youth! Great story. Enjoy. |
|
04-19-2024, 02:52 PM | #37 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 592
|
Re: Car Is Shrinking........
I've got a few pounds on you and would love to add a 33-4 Vicky to the stable. I wonder if any of the aprox 4,200 1933 Vickys got a 4 cylinder.
|
04-19-2024, 05:40 PM | #38 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,808
|
Re: Car Is Shrinking........
Keith, thx for the laugh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
04-19-2024, 06:25 PM | #39 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,827
|
Re: Car Is Shrinking........
|
04-20-2024, 10:42 AM | #40 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 592
|
Re: Car Is Shrinking........
I'm torn on which one to get. The rarer early 33 had a fender like the Model A but later and in 34 the fender had an extra piece behind the wheel. |
04-22-2024, 03:39 PM | #41 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,993
|
Re: Car Is Shrinking........
|
04-22-2024, 03:40 PM | #42 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,993
|
Re: Car Is Shrinking........
|
Sponsored Links (Register now to hide all advertisements) |
|
04-23-2024, 11:02 AM | #43 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: Car Is Shrinking........
|
04-23-2024, 11:05 AM | #44 | |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: Car Is Shrinking........
Quote:
I can't tell you about the number of 33 or 34 Victoria's built with a 4 cylinder. I can tell you that you will want a V8. The V8 engine makes the car so much more enjoyable. By the way, any 33-34 Ford is a great choice. |
|
04-24-2024, 08:31 AM | #45 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 305
|
Re: Car Is Shrinking........
After bending shifter to passenger side. First pic is first gear, second is neutral. Sorry about the pics, the sun coming into the garage windows was really bright.
|
04-24-2024, 11:20 AM | #46 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: Car Is Shrinking........
Sponsored Links (Register now to hide all advertisements)
|
04-25-2024, 06:26 AM | #47 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,808
|
Re: Car Is Shrinking........
I had a 31 vicki and easiest A to get in and out of.
may one day buy another........... |
04-25-2024, 10:38 AM | #48 | |
Senior Member
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
|
Re: Car Is Shrinking........
Quote:
I think the '33 or '34 is what was in the 1968 'Bonnie & Clyde' movie when his brother comes roaring up to the travel court. Oh, that exhaust rumble..... |
|
04-25-2024, 04:32 PM | #49 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,997
|
Re: Car Is Shrinking........
I'm kind of looking for a Victoria.I'm going to replace my July of 28 Phaeton.But,I only want a steelback,no puffy tops.I'd be just as happy with a slant window Fordor too.
|
04-26-2024, 05:03 AM | #50 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,808
|
Re: Car Is Shrinking........
Keith pass the fluffy tops to me.
A fordor can be bought for half the $................ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|