The Ford Barn

Bruce in southern OH · 11-02-2021, 07:35 PM

Does anyone have photo or location to view what parts are needed to install a power house generator on an early engine, thanks in advance.

old ugly · 11-02-2021, 08:22 PM

mine is all apart so i can't give you a photo.
all that is needed is the 1/2" bolt and nut to go through the generator bracket and the engine generator mount bracket which is part of the engine. that's it. the bolt cinches the generator to the motor.

an adjusting bracket is used from a front timing cover bolt to the side of the generator. although i ran mine for a long time with no adjusting bracket, it was just the bottom attaching bolt cinched tight. it never came loose on me.

old ugly · 11-02-2021, 08:29 PM

this is the whole smeer.

Bruce in southern OH · 11-03-2021, 08:14 AM

Thank you for time and photos, my generator just has two 1/4" screws in side, is there a little attachment bracket to connect to the engine adjustment arm bracket ??

old ugly · 11-03-2021, 09:47 AM

Sponsored Links (Register now to hide all advertisements)

sorry i just took for granted that the bracket was part of the generator
here is what i found

i have one generator that the adjusting arm bracket is attached with screw to the side of the generator, this is what i use on my car now.

i have another generator that has no provision for the adjuster bracket.

maybe the bracket was a change up when they went from side mount cutout to top mount cutout. but am not really sure.

so two different. yours would have had that little bracket?

11-02-2021, 07:35 PM	#1
Bruce in southern OH Senior Member Join Date: May 2010 Location: Proctorville Posts: 1,582	Generator mounting bracket and bolt for Power House Does anyone have photo or location to view what parts are needed to install a power house generator on an early engine, thanks in advance.

11-02-2021, 08:22 PM	#2
old ugly Senior Member Join Date: Aug 2021 Location: alberta canada Posts: 585	Re: Generator mounting bracket and bolt for Power House mine is all apart so i can't give you a photo. all that is needed is the 1/2" bolt and nut to go through the generator bracket and the engine generator mount bracket which is part of the engine. that's it. the bolt cinches the generator to the motor. an adjusting bracket is used from a front timing cover bolt to the side of the generator. although i ran mine for a long time with no adjusting bracket, it was just the bottom attaching bolt cinched tight. it never came loose on me. __________________ old ugly my old father-in-law told me. "listen close when people tell you how to do stuff they may know something. then do it the way you want."

11-03-2021, 08:14 AM	#4
Bruce in southern OH Senior Member Join Date: May 2010 Location: Proctorville Posts: 1,582	Re: Generator mounting bracket and bolt for Power House Thank you for time and photos, my generator just has two 1/4" screws in side, is there a little attachment bracket to connect to the engine adjustment arm bracket ??