|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-15-2018, 04:11 AM | #1 |
Senior Member
Join Date: Dec 2013
Location: Sydney, Australia
Posts: 112
|
Radiator base dimensions for 1946 coupe.
Does anyone have the centre distance for the two mounting holes for the base of the radiator? My bracket holes measure 580mm apart which is too wide for the radiator that was in the car when I got it. The radiator was loose in the car so I’m not sure if it’s the radiator that is wrong or the way the brackets are set up.
|
12-15-2018, 10:21 AM | #2 |
Senior Member
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 534
|
Re: Radiator base dimensions for 1946 coupe.
Ab4875. I measured my '46 rad brackets and got 22.750", which is 578 mm. I could be off a mm or two, as the temp in my garage is -20C and the tape may have shrunk from the cold.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-15-2018, 01:39 PM | #3 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,657
|
Re: Radiator base dimensions for 1946 coupe.
Measuring the 47 I get 22 1/4 inches with radiator mounted. Which is 565.15 mm
|
12-15-2018, 02:52 PM | #4 |
Senior Member
Join Date: Dec 2015
Posts: 287
|
Re: Radiator base dimensions for 1946 coupe.
I get 22 1/2" on my '48 on a radiator that is out of the car.
|
12-15-2018, 05:56 PM | #5 |
Senior Member
Join Date: Dec 2013
Location: Sydney, Australia
Posts: 112
|
Re: Radiator base dimensions for 1946 coupe.
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|