The Ford Barn

Ron Lowe · 02-14-2014, 12:50 PM

I noticed my amp gauge was not showing a charge. I thought my problem was the cut-out so I used a jumper cable to bypass the cut-out and it did show a normal charge. With nothing to loose I took the cut-out apart and found the diode to be good but the solder had broken. After re-soldering all is working well. Hope this helps someone

jm29henry · 02-14-2014, 01:06 PM

that great for once a easy fix!!

fordUSA · 04-23-2014, 08:31 AM

Sponsored Links (Register now to hide all advertisements)

Would you happen to have the spec on the diode? Any number on the side of it would be a big help. Thanks.

02-14-2014, 12:50 PM	#1
Ron Lowe Senior Member Join Date: May 2010 Posts: 184	Cut-out follow up I noticed my amp gauge was not showing a charge. I thought my problem was the cut-out so I used a jumper cable to bypass the cut-out and it did show a normal charge. With nothing to loose I took the cut-out apart and found the diode to be good but the solder had broken. After re-soldering all is working well. Hope this helps someone

02-14-2014, 01:06 PM	#2
jm29henry Senior Member Join Date: Sep 2010 Location: michigan Posts: 1,126	Re: Cut-out follow up that great for once a easy fix!!

04-23-2014, 08:31 AM	#3
fordUSA Junior Member Join Date: Apr 2014 Posts: 2	Re: Cut-out follow up Sponsored Links (Register now to hide all advertisements) Would you happen to have the spec on the diode? Any number on the side of it would be a big help. Thanks.