The Ford Barn

fins2nv · 10-18-2014, 05:13 PM

I have had my 1930 coupe for a couple months and have been learning a lot. I keep reading in posts and such about the pop-out ignition switch. Just what is it? Nothing "pops out" with my switch. I just put the key in and turn it. Do I not have a pop-out or is it not working correctly?

Carb Guy · 10-18-2014, 06:16 PM

No you do not have a Pop-out from what you are saying about just turning the key. The pop-out does pop out when you turn it and then to turn it off you push it in .

Mike Peters · 10-18-2014, 07:40 PM

Here's a late 28 pop out switch. The key turns a button. Key in vertical position, push the button in for OFF. Turn key clockwise and the button will "pop out" in the ON position. Hence the name.

Fred K-OR · 10-18-2014, 10:50 PM

Unless you want an all "original " car, you don't need one. It was also suppose to make it harder for someone to make off with your car.

Richard Redmond · 10-19-2014, 04:50 AM

The pop-out ignition switch is one of the most fun and fascinating things about the Model A.

There is plenty of information about them - and worth a read. I chose to replace my replica non-pop-out with an original of the right year. First, you may be sacrificing the accessory terminal on the replica. Second, the correct length of the armoured cable leading to the distributor is very important. Third, the pop-out may need easy but careful restoration to ensure that it is reliable. Fourth, check the inside of your instrument panel to see if it is original. Many had the pop-out flanges or lugs cut off to accept the modern replica switch.

An original pop-out is very satisfying. Turn the key and the button pops out. Remove the key and drive away. Push the button in to stop the engine. Cool.

fins2nv · 10-19-2014, 07:22 AM

Sponsored Links (Register now to hide all advertisements)

Thanks for the information guys. I appreciate it.

10-18-2014, 05:13 PM	#1
fins2nv Member Join Date: Aug 2014 Location: Fargo, ND Posts: 73	Pop-out ignition I have had my 1930 coupe for a couple months and have been learning a lot. I keep reading in posts and such about the pop-out ignition switch. Just what is it? Nothing "pops out" with my switch. I just put the key in and turn it. Do I not have a pop-out or is it not working correctly?

10-18-2014, 06:16 PM	#2
Carb Guy Senior Member Join Date: May 2010 Location: Wisconsin Posts: 186	Re: Pop-out ignition No you do not have a Pop-out from what you are saying about just turning the key. The pop-out does pop out when you turn it and then to turn it off you push it in .

10-18-2014, 10:50 PM	#4
Fred K-OR Senior Member Join Date: May 2010 Location: Stayton, Oregon Posts: 3,806	Re: Pop-out ignition Unless you want an all "original " car, you don't need one. It was also suppose to make it harder for someone to make off with your car. __________________ Fred Kroon 1929 Std Coupe 1929 Huckster

10-19-2014, 04:50 AM	#5
Richard Redmond Senior Member Join Date: Oct 2010 Location: Scarborough, Yorkshire Posts: 119	Re: Pop-out ignition The pop-out ignition switch is one of the most fun and fascinating things about the Model A. There is plenty of information about them - and worth a read. I chose to replace my replica non-pop-out with an original of the right year. First, you may be sacrificing the accessory terminal on the replica. Second, the correct length of the armoured cable leading to the distributor is very important. Third, the pop-out may need easy but careful restoration to ensure that it is reliable. Fourth, check the inside of your instrument panel to see if it is original. Many had the pop-out flanges or lugs cut off to accept the modern replica switch. An original pop-out is very satisfying. Turn the key and the button pops out. Remove the key and drive away. Push the button in to stop the engine. Cool.

10-19-2014, 07:22 AM	#6
fins2nv Member Join Date: Aug 2014 Location: Fargo, ND Posts: 73	Re: Pop-out ignition Sponsored Links (Register now to hide all advertisements) Thanks for the information guys. I appreciate it.