|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-15-2013, 05:14 PM | #1 |
Junior Member
Join Date: Apr 2013
Location: Napa Valley
Posts: 8
|
NEED Correct 1948 Plug Wires
OK-- Tried to enter once, seems like it did not work. I am NEW to this forum, but a long time AACA forum user. So here goes again.
I have a 48 V8 that I need to find an absolute correct plug wire set for a high point restoration. The NEW set I have is BROWN (correct) but is cracking and brittle causing shorts inside the cap. I do not want another set from this supplier, does anyone know who has a good quality set? OR shall I buy wire and make my own? If so, who has the correct wire and ends? Thanks! Rod |
04-15-2013, 05:41 PM | #2 |
Junior Member
Join Date: Apr 2013
Location: Napa Valley
Posts: 8
|
Re: NEED Correct 1948 Plug Wires
aw shucks -- my bad-- NOW I see my original post-- OK, so I am a dummy. Now lets get back to work.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-15-2013, 09:32 PM | #3 |
Senior Member
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
|
Re: NEED Correct 1948 Plug Wires
well, heck...welcome to the 'Barn...got pics??....Mike
|
04-16-2013, 03:54 PM | #4 |
Member
Join Date: Apr 2013
Location: Auburn, CA
Posts: 86
|
Re: NEED Correct 1948 Plug Wires
|
04-19-2013, 08:53 PM | #5 |
Senior Member
Join Date: May 2010
Location: Hereford, Maryland
Posts: 218
|
Re: NEED Correct 1948 Plug Wires
Try Rhode Island wiring
|
04-19-2013, 09:32 PM | #6 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: NEED Correct 1948 Plug Wires
Sponsored Links (Register now to hide all advertisements)
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
04-20-2013, 08:39 AM | #7 |
Senior Member
Join Date: Jun 2010
Location: West Hammond, Illinois
Posts: 2,793
|
Re: NEED Correct 1948 Plug Wires
Here is another source. I am happy with the wiring I bought from these guys.
http://www.narragansettreproductions.com/ |
04-20-2013, 09:10 AM | #8 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: NEED Correct 1948 Plug Wires
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|