The Ford Barn

toms32 · 11-17-2012, 04:01 PM

Tech Question - Can any expert out there tell me if the rear window garnish moulding for a sedan is the same as a 5 Window coupe. thanks for any help on this. tom

Brian · 11-17-2012, 04:29 PM

Sure is

toms32 · 11-17-2012, 05:04 PM

Thanks Brian for taking the time to help on this issue. Tom

Barn Junk · 11-17-2012, 07:04 PM

NO, They are different!!! The coupes almost always have the roll down rear window and the frame has provisions (slots) for two rubber bumpers that the glass slides on. The shape is a little different also.

nostalgia59 · 11-17-2012, 08:40 PM

Yes they are different. I think the coupe is a little taller...

Randy in ca · 11-18-2012, 03:59 PM

Sponsored Links (Register now to hide all advertisements)

The easiest way to tell them apart at a glance is the shape of the bottom of the frame. The coupe garnish have a slight upward arch while those for sedans are pretty much straight across.

Tim Brown · 11-18-2012, 09:10 PM

I have an extra one for a sedan if you need it. PM me...

11-17-2012, 04:01 PM	#1
toms32 Senior Member Join Date: May 2010 Posts: 2,221	1936 Ford Coupe - Tech Question Tech Question - Can any expert out there tell me if the rear window garnish moulding for a sedan is the same as a 5 Window coupe. thanks for any help on this. tom

11-17-2012, 04:29 PM	#2
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,838	Re: 1936 Ford Coupe - Tech Question Sure is

11-17-2012, 05:04 PM	#3
toms32 Senior Member Join Date: May 2010 Posts: 2,221	Re: 1936 Ford Coupe - Tech Question Thanks Brian for taking the time to help on this issue. Tom

11-17-2012, 07:04 PM	#4
Barn Junk Senior Member Join Date: May 2010 Location: WA state Posts: 771	Re: 1936 Ford Coupe - Tech Question NO, They are different!!! The coupes almost always have the roll down rear window and the frame has provisions (slots) for two rubber bumpers that the glass slides on. The shape is a little different also.

11-17-2012, 08:40 PM	#5
nostalgia59 Member Join Date: May 2010 Location: Torrance Ca. Posts: 51	Re: 1936 Ford Coupe - Tech Question Yes they are different. I think the coupe is a little taller...

11-18-2012, 03:59 PM	#6
Randy in ca Senior Member Join Date: May 2010 Posts: 1,654	Re: 1936 Ford Coupe - Tech Question Sponsored Links (Register now to hide all advertisements) The easiest way to tell them apart at a glance is the shape of the bottom of the frame. The coupe garnish have a slight upward arch while those for sedans are pretty much straight across.

11-18-2012, 09:10 PM	#7
Tim Brown Senior Member Join Date: May 2010 Location: Colfax, CA Posts: 387	Re: 1936 Ford Coupe - Tech Question I have an extra one for a sedan if you need it. PM me...