11-08-2017, 09:55 AM | #1 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Swaging hubs
Sure this has been covered.
Is a 20 ton press enough to swage lug bolts to hubs and drums? Seems like it would take closer to 30 Ton to get it done right? Thanks |
11-08-2017, 10:22 AM | #2 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 189
|
Re: Swaging hubs
No, a 20 ton Chinese press will not do the job. It takes an honest 22-23 tons to swage the lugs so use at least a 30 ton press.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-08-2017, 10:37 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 335
|
Re: Swaging hubs
Times 2
|
11-08-2017, 10:52 AM | #4 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Re: Swaging hubs
Thanks that is what I thought.
|
11-08-2017, 01:39 PM | #5 |
Junior Member
Join Date: Aug 2016
Posts: 23
|
Re: Swaging hubs
I ended up right at 24 on mine when they were tight.
|
11-08-2017, 04:11 PM | #6 |
Senior Member
Join Date: May 2010
Location: New Jersey
Posts: 734
|
Re: Swaging hubs
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|