|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-30-2016, 02:29 PM | #1 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
My new iron Winfields.
I don't remember if I asked this in the past or not. The first iron Winfield has been machined, pressure tested, and is supposed to be going on an engine very soon. Another is slated to be tested by hardtimes as soon as I can get it to him.
That brings me to the question as to how many people are going to be interested in ordering one of these, beyond the few people who have already committed. I have emails from at least a dozen people wanting to send me money, but I have refused to take more than a couple of deposits, since I wanted to make sure of the castings and machining before committing to production. Machining is ready. Castings are good enough to warrant my commitment to producing these in quantity now. The question remains- how many people are interested? Email me if you are interested and I will keep a better list and figure out how many the first run will be. Tod |
01-30-2016, 03:54 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: Phoenix AZ/Bath UK
Posts: 481
|
Re: My new iron Winfields.
Sent!
|
Sponsored Links (Register now to hide all advertisements) |
|
01-30-2016, 04:29 PM | #3 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,781
|
Re: My new iron Winfields.
My interest was in two aluminum Thomas heads.......... 6-1 or 7-1
ronn |
01-30-2016, 07:05 PM | #4 |
Senior Member
Join Date: May 2010
Location: Kenosha, WI
Posts: 1,001
|
Re: My new iron Winfields.
Tod,
Are you planing on adding the Winfield Script or with out? Thanks, Jim |
01-30-2016, 07:47 PM | #5 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: My new iron Winfields.
|
01-30-2016, 07:52 PM | #6 |
Senior Member
Join Date: May 2010
Location: Northern New Jersey
Posts: 1,262
|
Re: My new iron Winfields.
Sponsored Links (Register now to hide all advertisements)
Can you give a ball park figure on the cost and shipping to 07646 ? Thanks, Mike |
01-30-2016, 09:15 PM | #7 |
Senior Member
Join Date: Apr 2013
Location: West Australia
Posts: 346
|
Re: My new iron Winfields.
Tod, I know that I would definitely prefer the Winfield script. Once you have machined the crowsfoot head, could you please let us know which head gasket you recommend?? Thanks
|
01-31-2016, 08:32 AM | #8 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: My new iron Winfields.
|
01-31-2016, 06:22 PM | #9 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: My new iron Winfields.
Bill Carlson just posted 2 Instagram links over on the HAM of the 73b running the first new iron 6:1 Winfield.
https://instagram.com/p/BBOFigOk9e-/ https://instagram.com/p/BBOKWG0k9ac/ Tod |
02-01-2016, 12:44 AM | #10 |
Senior Member
Join Date: May 2010
Location: Seattle
Posts: 389
|
Re: My new iron Winfields.
I'm only really interesting in it if it says Winfield.
__________________
Matt in Seattle |
02-01-2016, 12:17 PM | #11 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: My new iron Winfields.
Thanks for posting the links to my IG page Tod.
The ford barn is not very IPhone friendly for adding pics. I will be bring my car to my engine guys shop to get A real world compression ratio of the head. I hope the weather keeps holding out. |
02-02-2016, 07:54 AM | #12 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: My new iron Winfields.
I still have one more iron Winfield 6:1 to put out for testing. Anyone interested?
Tod |
02-02-2016, 02:47 PM | #13 | |
Senior Member
Join Date: May 2010
Location: South California
Posts: 6,188
|
Re: My new iron Winfields.
Quote:
Hey Tod, I know, but forgot answer. You have said 'added head surface thickness'. Is there enough thickness to increase cr if wanted/needed ? BTW...If it is helpful, I'll test anything that you send this way ! The alum Winfield off and this B is in waiting Last edited by hardtimes; 02-02-2016 at 02:50 PM. Reason: ............. |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|