|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
04-14-2014, 09:53 PM
|
#1 |
|
Member
Join Date: Mar 2011
Posts: 43
|
Left front brake cylinder
Does anyone know where I can purchase an "AMERICAN MADE" left front wheel cylinder for 1938-48 Passenger car Part # 21A 2062? Thank you
|
|
|
|
04-14-2014, 11:28 PM
|
#2 |
|
Senior Member
Join Date: Jul 2010
Location: Yorba Linda, CA
Posts: 897
|
Re: Left front brake cylinder
Might try Raybestos, Wagner and what ever happened to EIC? At least with these,
when the castings are made in china, they hold their suppliers to a higher standard of quality. The W/C I've purchased from NAPA were fine, no issues.
__________________
Henry Ford designed the flathead without the aid of a computer. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
04-15-2014, 07:36 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,184
|
Re: Left front brake cylinder
I found 2 Wagner NOS rear cylinders, but had to pay about double for them.
The Chinese rear cylinders have some problems,but the front ones seem ok. If you want USA you have to look for NOS. John |
|
|
|
|
04-15-2014, 10:13 AM
|
#4 |
|
Senior Member
Join Date: May 2010
Location: near Washington, DC
Posts: 559
|
Re: Left front brake cylinder
As an alternative, you might consider having your original cylinder sleeved.
__________________
Those who do not move do not die, but are they not already dead? |
|
|
|
|
04-16-2014, 10:53 PM
|
#5 |
|
Member
Join Date: Mar 2011
Posts: 43
|
Re: Left front brake cylinder
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:11 AM.