Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-08-2019, 07:17 AM   #1
Upstate gearhead
Junior Member
 
Join Date: Feb 2017
Location: Piedmont SC
Posts: 22
Default 3speed side loader cluster gear plate

I'm rebuilding an 889A 3 speed side loader. It needs a cluster gear rear plate, but the only one available is 32-16823-1 which is "thick" at 0.180 inches. I need one at 0.120 inches. Is one available?
Upstate gearhead is offline   Reply With Quote
Old 11-08-2019, 07:52 AM   #2
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,144
Default Re: 3speed side loader cluster gear plate

Call Mac @ Van Pelt Sales.
Tim Ayers is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-08-2019, 08:18 AM   #3
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,931
Default Re: 3speed side loader cluster gear plate

http://www.vanpeltsales.com/index.htm
He also has a great book on transmissions.
corvette8n is offline   Reply With Quote
Old 11-08-2019, 08:44 AM   #4
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,725
Default Re: 3speed side loader cluster gear plate

Sponsored Links (Register now to hide all advertisements)
899A=1948 100HP, the rear cluster should use both the smooth washer 8M-7128, 0.045 to 0.047" and 8M-7129 thrust washer 0.138-0.140" the hole in the center of the thrust washer is somewhat bow tie shaped.
Terry,OH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:15 PM.