Y block shop

[Ronfox69]

I received great responses to my first post. Thanks to all of you. I am looking for a respected y block mechanic in the s.w. Pa. Area. Anyone have any first hand experience? Ron Fox

[55blacktie]

Ron, if you do find someone, don't procrastinate. Nobody is getting any younger. The handful of Y-block experts I know are scaling back. Finding someone to do other than a stock rebuild will be even harder.

[54FordYBlockGuy]

Ron: ike 55blacktie said; Vintage, Collector 50 Car Mechanics are getting extremely difficult to find; it just may be a great time; via asking questions, doing research and forums like this that you begin to learn; do the work yourself. It can prove extremely rewarding; good luck

[cos]

If you have not checked out Y-blocksforever forum join up. There are fellas there that know everything about them and will answer questions.

[51504bat]

See this post on the HAMB
https://www.jalopyjournal.com/forum/...#post-14672130


Joe Vigorita and the shop is ECAM (east coast auto machine) he's in Glenside Pa 19038 and his number is 215-885-3510


The post was about flatheads but said he does other stuff as well. Might be worth a call. JMO


Also, might help to add at least your general area to your profile.

[Ronfox69]

Sponsored Links (Register now to hide all advertisements)

Thanks for the replies guys
Good to have you comment to my questions. Ron Fox