|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-02-2021, 07:35 PM | #1 |
Senior Member
Join Date: May 2010
Location: Proctorville
Posts: 1,582
|
Generator mounting bracket and bolt for Power House
Does anyone have photo or location to view what parts are needed to install a power house generator on an early engine, thanks in advance.
|
11-02-2021, 08:22 PM | #2 |
Senior Member
Join Date: Aug 2021
Location: alberta canada
Posts: 585
|
Re: Generator mounting bracket and bolt for Power House
mine is all apart so i can't give you a photo.
all that is needed is the 1/2" bolt and nut to go through the generator bracket and the engine generator mount bracket which is part of the engine. that's it. the bolt cinches the generator to the motor. an adjusting bracket is used from a front timing cover bolt to the side of the generator. although i ran mine for a long time with no adjusting bracket, it was just the bottom attaching bolt cinched tight. it never came loose on me.
__________________
old ugly my old father-in-law told me. "listen close when people tell you how to do stuff they may know something. then do it the way you want." |
Sponsored Links (Register now to hide all advertisements) |
|
11-02-2021, 08:29 PM | #3 |
Senior Member
Join Date: Aug 2021
Location: alberta canada
Posts: 585
|
Re: Generator mounting bracket and bolt for Power House
this is the whole smeer.
__________________
old ugly my old father-in-law told me. "listen close when people tell you how to do stuff they may know something. then do it the way you want." |
11-03-2021, 08:14 AM | #4 |
Senior Member
Join Date: May 2010
Location: Proctorville
Posts: 1,582
|
Re: Generator mounting bracket and bolt for Power House
Thank you for time and photos, my generator just has two 1/4" screws in side, is there a little attachment bracket to connect to the engine adjustment arm bracket ??
|
11-03-2021, 09:47 AM | #5 |
Senior Member
Join Date: Aug 2021
Location: alberta canada
Posts: 585
|
Re: Generator mounting bracket and bolt for Power House
Sponsored Links (Register now to hide all advertisements)
here is what i found i have one generator that the adjusting arm bracket is attached with screw to the side of the generator, this is what i use on my car now. i have another generator that has no provision for the adjuster bracket. maybe the bracket was a change up when they went from side mount cutout to top mount cutout. but am not really sure. so two different. yours would have had that little bracket?
__________________
old ugly my old father-in-law told me. "listen close when people tell you how to do stuff they may know something. then do it the way you want." |
|
|
Sponsored Links (Register now to hide all advertisements) |
|