Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-21-2012, 08:22 PM   #1
Woodie1
Senior Member
 
Woodie1's Avatar
 
Join Date: Mar 2011
Location: W. Mich.
Posts: 471
Default Head Gasket

Which is the proper side down on the Model A head Gasket. Crimped edge down so you only see the smooth gasket surface when it is on the block? Thanks.
Woodie1 is offline   Reply With Quote
Old 03-21-2012, 08:41 PM   #2
Jim Johnston
Senior Member
 
Jim Johnston's Avatar
 
Join Date: May 2010
Location: Newnan, GA
Posts: 106
Default Re: Head Gasket

Sponsored Links (Register now to hide all advertisements)
Woodie, If you are referring to the copper/sandwich gasket the crimped side is usually installed facing the head.
Jim Johnston is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:16 PM.