The Ford Barn

46fordnut · 06-01-2014, 12:27 PM

i started my stock 1946 ford . it was popping from tail pipe...(loud) i thought it maybe sticky valve. took the dis cap off its got heavy carbon tracks . so i need to know who has a good but not to expensive cap and rotor for a 59ab two piece cap with the small clips also need the pins to hold little clips to cap. i have the big bail clip.

Big_Guys_baby · 06-01-2014, 12:59 PM

Sponsored Links (Register now to hide all advertisements)

Do some research, but I have been told that the crab type distributor cap can replace the two piece "bunny ears" style. I was told this after I went through tremendous pain in the rear of running the spark plug wires through the top piece of my bunny ear style one.

06-01-2014, 12:27 PM	#1
46fordnut Senior Member Join Date: Jun 2011 Location: new jersey Posts: 228	1946 popping issue i started my stock 1946 ford . it was popping from tail pipe...(loud) i thought it maybe sticky valve. took the dis cap off its got heavy carbon tracks . so i need to know who has a good but not to expensive cap and rotor for a 59ab two piece cap with the small clips also need the pins to hold little clips to cap. i have the big bail clip. __________________ if rust were money i would be a billionaire!!

06-01-2014, 12:59 PM	#2
Big_Guys_baby Senior Member Join Date: Mar 2011 Location: North Carolina Posts: 191	Re: 1946 popping issue Sponsored Links (Register now to hide all advertisements) Do some research, but I have been told that the crab type distributor cap can replace the two piece "bunny ears" style. I was told this after I went through tremendous pain in the rear of running the spark plug wires through the top piece of my bunny ear style one.