|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-14-2014, 03:15 PM | #1 |
Senior Member
Join Date: May 2011
Location: Carthage, NC
Posts: 147
|
600R16 vs. bias ply tires
My 31 Coupe has the 16 inch wheels and I'm considering buying new tires for it.
Can anyone tell me if replacing the old bias ply tires with radial tires will improve the ride? A set of radials will be about $120 more than the bias ones I think. Are they worth it? What do you think?
__________________
John the Model A Rookie from North Carolina |
11-14-2014, 04:23 PM | #2 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Re: 600R16 vs. bias ply tires
Yes on our roads which are not as smooth as yours , 205 x 80 x 8ply, Some toyota , nissen pickups around 2010-2012 had them , cockies here take them off & fit mud grips , the light wall us radial tyres on two of our inports could not keep them on the road , too soft in the walls , fitted the above & at 120 kph stable as a modern plus they are taller than 600x16 , just my experiance , in NZ
|
Sponsored Links (Register now to hide all advertisements) |
|
11-14-2014, 04:25 PM | #3 |
Senior Member
Join Date: Jul 2011
Location: Elko Nevada
Posts: 217
|
Re: 600R16 vs. bias ply tires
I haven't run them on my Model A, but on my old 50's cars I was worried that they would ride differently.
I did use them and liked the smoother ride, especially when first moving; the bias tires had a memory and would have a flat spot for a while until they heated up. Also the radials looked a little funny, like they needed air but that is the nature of the beast. If you want that tall "on the tread" look you will not be getting it. Most likely safer and easier to replace on the road if you have trouble. Just my humble opinion. |
11-15-2014, 02:24 AM | #4 |
Senior Member
Join Date: Nov 2010
Location: Sedro-Woolley, WA
Posts: 1,023
|
Re: 600R16 vs. bias ply tires
I purchase the 600 X 16 radials from Coker tire two years ago. They have the correct profile for a 600 X 16. They handle better. They stop better. The give better tire and gas mileage. Other than not being the correct tire size for the model A year of manufacture, it is a no brainer to switch to the radials.
|
11-15-2014, 05:39 PM | #5 |
Senior Member
Join Date: May 2010
Location: Oxford Hills, Maine
Posts: 325
|
Re: 600R16 vs. bias ply tires
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|