|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-03-2022, 09:58 AM | #1 |
Junior Member
Join Date: Aug 2022
Posts: 15
|
Engine cross member
Does anyone have a picture of the cross member that the front engine mount goes through. I need to know the size of the hole for the front motor mount. Someone has welded a washer on mine.
|
10-03-2022, 12:23 PM | #2 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Re: Engine cross member
Here’s a pic of the crossmember on my ‘29 sport coupe.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-03-2022, 12:30 PM | #3 |
Junior Member
Join Date: Aug 2022
Posts: 15
|
Re: Engine cross member
That helps, mine is a 29 Tudor should be the same. Thanks
|
10-03-2022, 02:24 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,476
|
Re: Engine cross member
Sponsored Links (Register now to hide all advertisements)
The hole was changed from 3/4" to 7/8" in December of 1928 so that is the final size. Last edited by rotorwrench; 10-03-2022 at 02:57 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|