Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-28-2013, 05:06 PM   #1
xqsme
Junior Member
 
xqsme's Avatar
 
Join Date: Apr 2013
Location: la crosse va
Posts: 12
Default Need some 6.00 x 16 tires, any suggestions other than coker

Need a set of 16's. Have not had very good luck with cokers. Any feedback is greatly appriciated.
thanks.
Attached Images
File Type: jpg IMGP6329.JPG (81.5 KB, 25 views)
xqsme is offline   Reply With Quote
Old 05-28-2013, 05:08 PM   #2
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,181
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Lesters have always been good. I think the tire dealer on the East Coast (I forget their name) sells these.
Tim Ayers is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-28-2013, 08:16 PM   #3
Milt K from Pa
Senior Member
 
Milt K from Pa's Avatar
 
Join Date: May 2010
Location: Pittsburgh Pa. Area
Posts: 272
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I have used Coker many times. I feel their customer care is first rate. I had a problem with a set of Firestones, and they covered them completely. I'll continue to use Coker.

Milt K from Pa
Milt K from Pa is offline   Reply With Quote
Old 05-29-2013, 06:18 AM   #4
Vic Piano
Senior Member
 
Vic Piano's Avatar
 
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I've used Coker with mixed results, with both bias ply and radials... The Coker Firestone 600x16 in bias ply were problematic (excessive wear in a short time) however, the Coker B.F. Goodrich 700x16's have been excellent. The Coker Classic 600x16 radials are also excellent but a set of Coker Classic 15" radials literally came apart (tread separated) on three of the four tires...
__________________
Imagination is more important than knowledge.
Vic Piano is offline   Reply With Quote
Old 05-29-2013, 06:38 AM   #5
Steves46
Senior Member
 
Steves46's Avatar
 
Join Date: May 2010
Location: Lithia, FL
Posts: 1,050
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

If you are interested in radials, I have been running Diamondback (Yokohama brand) 195/80R16 (600-16 equivalent) for close to 2 years/5000 miles without any problems and a great ride. Steve
__________________
If it aint broke, don't fix it!
Steves46 is offline   Reply With Quote
Old 05-29-2013, 06:39 AM   #6
Tom Morookian
Senior Member
 
Tom Morookian's Avatar
 
Join Date: May 2010
Location: N. Ft. Myers, Fl.
Posts: 502
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Sponsored Links (Register now to hide all advertisements)
I had a problem (out of round) with a tire from Universal. 4 years old tire and they gave me a new one and paid the freight. SUPER supplier!

https://www.universaltire.com/radial...all-tires.html
Tom Morookian is offline   Reply With Quote
Old 05-29-2013, 06:42 AM   #7
Zeke...PA
Senior Member
 
Zeke...PA's Avatar
 
Join Date: May 2010
Location: Delta, PA
Posts: 525
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Universal tire, just outside of Hershey PA., carry a fair selection got my "A" tires there. Zeke
__________________
Only problem with retirement is never a day off
Zeke...PA is offline   Reply With Quote
Old 05-29-2013, 08:02 AM   #8
GOW
Senior Member
 
GOW's Avatar
 
Join Date: Oct 2010
Location: UPSTATE,NY
Posts: 158
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I like diamond back....
GOW is offline   Reply With Quote
Old 05-29-2013, 08:50 AM   #9
Seth Swoboda
Senior Member
 
Seth Swoboda's Avatar
 
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Diamond Back tires
Seth Swoboda is offline   Reply With Quote
Old 05-29-2013, 09:02 AM   #10
Planojc
Senior Member
 
Planojc's Avatar
 
Join Date: May 2010
Location: Plano, Texas
Posts: 848
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I got my Diamond Back tires through Discount Tire. Same price as if you ordered them from DB. Yokohama 195/80R16
Planojc is offline   Reply With Quote
Old 05-29-2013, 09:24 AM   #11
Robert Dip
Senior Member
 
Robert Dip's Avatar
 
Join Date: Feb 2011
Location: Candiac, Qc.
Posts: 483
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I also have mixed reviews on Coker. Similar bias ply tires that some WW turned brown, while the other was OK...no help from them here....on radials, in the past, tires totally deformed to the point of not being able to drive the car at all....stranded and 150 miles away from home....had to buy a temp replacement tire to continue....only to have the tire on the other side of the car do the same....10 minutes after getting back on the road....back to the tire shop for another tire change. It cost me a pile of trouble....not easy to change tires on wire wheels...and the extra cost to do this. My entire day was ruined....I arrived at the car show at 4:00 and left at 6:00....Great. When I returned them back to Coker...they charged me the 5% wear....and that....was totally maddening...if not downright insulting...especially the cost and time lost I had with this problem. I have heard such good thing on DiamondBack, that the Coker radials are on my taboo list. my 2 cents....Robert
Robert Dip is offline   Reply With Quote
Old 05-29-2013, 10:10 AM   #12
xqsme
Junior Member
 
xqsme's Avatar
 
Join Date: Apr 2013
Location: la crosse va
Posts: 12
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

So, if running radials on 16" wires, do you need tubes?
thanks
xqsme is offline   Reply With Quote
Old 05-29-2013, 10:21 AM   #13
Ken Bull
Senior Member
 
Ken Bull's Avatar
 
Join Date: Dec 2010
Location: Port St Lucie Florida
Posts: 398
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I put 15" Rims on my 40 PU & drove 19 years on Goodyear radials & the truck handled better than it did with Bias Ply. But, when I restored my 36 Cabriolet knowing of less performance & lower wear mileage I went with Cokers 600 x 16 Firestone Bias Ply with the "pie crust" design & wide WW just because the Car would show best (in my opinion) I have had no problem so far - installed them 09/2011 but then I haven put 1,000 miles on yet. I hope the WWs dont turn Brown--OK so far
Ken Bull is offline   Reply With Quote
Old 05-29-2013, 10:28 AM   #14
37don
Senior Member
 
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

DIMONDBACK one and done you will never wear them out and are a modern tire.
Regards, Don
37don is offline   Reply With Quote
Old 05-29-2013, 10:49 AM   #15
brien
Member
 
brien's Avatar
 
Join Date: Feb 2013
Location: Brooklyn CT
Posts: 98
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

I purchased four 17.5 tubeless from Universal for $1000 including shipping. Very satisfied w/ them.
brien is offline   Reply With Quote
Old 05-29-2013, 10:58 AM   #16
MuskegonFlatheadFan
Senior Member
 
MuskegonFlatheadFan's Avatar
 
Join Date: Sep 2011
Location: Muskegon, MI
Posts: 252
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

You can try Lucas too, theyare in Springfield OH.
http://www.lucasclassictires.com/main.sc
MuskegonFlatheadFan is offline   Reply With Quote
Old 05-29-2013, 11:21 AM   #17
lonewolf
Senior Member
 
Join Date: May 2010
Location: Michigan
Posts: 464
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Lesters
lonewolf is offline   Reply With Quote
Old 05-29-2013, 01:26 PM   #18
woodiewagon46
Senior Member
 
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,555
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

We just had a long discussion about Koker tires a few weeks ago. I literally wore the outsides of the treads on the outer edges of my Koker tires. If you looked at them you would have said they were very under inflated, but I keep my pressure at the recommended 35psi. When I showed pictures of the tires to the Koker people at Hershey I was told that "Koker tires are for show cars and not drivers". Several others loved in and were told the same thing. Go with Diamondbacks or Universal.
woodiewagon46 is offline   Reply With Quote
Old 05-29-2013, 02:09 PM   #19
bluardun
Senior Member
 
bluardun's Avatar
 
Join Date: May 2010
Location: Tucson, Az.
Posts: 322
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

There are modern radial tires available from Sears. Such as a Cooper, Goodyear, or B F Goodrich.
bluardun is offline   Reply With Quote
Old 05-29-2013, 02:33 PM   #20
ford3
Senior Member
 
Join Date: Oct 2012
Location: oroville calif.
Posts: 1,453
Default Re: Need some 6.00 x 16 tires, any suggestions other than coker

Lucas, Dunlop, Firestone
ford3 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:59 AM.