1932 Original Ford Chassis

[kidatheart]

4 cylinder chassis was running restored with original B motor and transmission rear end and mechanical brakes. The chassis has been disasembled. The frame has been sandblasted and ready for paint. There have been many small changes.
The 4 cylinder has been removed, and a newly rebuilt 21 stud flathead with original Eddie Meyer heads accompany the chassis (no cracks, no broken fins). Rebuilt 39 transmission has taken place of the original "B" trans.New (E-Z steer) steering has been installed, with new reproduct 40 Ford steering wheel. many of the original parts have been chrome plated:

• Original wishbone
• Original 32 beam axle
• Original front backing plates
• Spindles
• King pins
• Tie rod
• Drag link
• New front reversed eye spring
• Front spring clamps (frame)
• Front brake rods
• Rear brake rods
• Most of the new exhaust system
• new old stock rear spring 9all leaves)
• Rear spring clamp (frame)
• Trottle linkage
• Front spreader bar
• Rear spreader bar
• Many miscallaneous small parts

The chrome plating above listed cost approximately $4500
The chassis also includes original 32 radiator

There is a set of new Firestone wide white walls mounted on newly powdercoated 35 Ford 16" wheels. Fronts are 600x 16 and rear are 750x16.
Hub caps are original 32 Ford in excellent condition from the original restored chassis. headlights are nice original Chevrolet bullet style, with custom fabricated frame brackets. The taillights are matching style with custom brackets to frame.
I have probably overlooked many small custom modifications that have been completed such as fuel lines, wiring harness tubing looms, shock mounts.
Please call if you would like to see in person or to ask questions.
Jerry 925-788-9891

[Hilltop62]

Hi,
do you still have this chassis?
I'm interested.
Thanks/ Joe

[farmer]

Sponsored Links (Register now to hide all advertisements)

it's sold