|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-31-2014, 04:03 PM | #1 |
Member
Join Date: Sep 2013
Location: Athens AL
Posts: 60
|
Front Brake Drum Removal from Hub?
How do I separate the front wheel hub from the brake drum? Thanks for any advise, unable to find in the book? Jerry
|
08-31-2014, 04:19 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,757
|
Re: Front Brake Drum Removal from Hub?
See Vince's site, scroll down and he shows how to remove the swaded
stud and get the drum off. http://www.fordgarage.com/pages/swaging.htm Bob |
Sponsored Links (Register now to hide all advertisements) |
|
08-31-2014, 04:43 PM | #3 |
Senior Member
Join Date: Mar 2013
Location: San Antonio
Posts: 177
|
Re: Front Brake Drum Removal from Hub?
I've never used the tool sold to remove hubs personally. Last time I cut all the studs flush with the drum then used an end mill and just plung cut through them and knocked them out. However, the tool does look easier...
|
08-31-2014, 06:05 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: Maryville,Tn
Posts: 302
|
Re: Front Brake Drum Removal from Hub?
Buy a hole saw for metal..little larger than the stud. Put it in a 1/2" drill and cut down into the swage a bit...hit it with a hammer and she should fall out...at least thats how i did mine.
|
08-31-2014, 08:14 PM | #5 |
Senior Member
Join Date: May 2010
Location: Oxford Hills, Maine
Posts: 325
|
Re: Front Brake Drum Removal from Hub?
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|