The Ford Barn

Bishop Welding · 05-10-2010, 01:53 PM

sold

Elmo Rodge · 05-10-2010, 03:56 PM

Rob, the rear corners on a FRONT seat of a Fordor curve forward. Rounded off like a T Touring, if you know what I mean. Yours looks more like a rear seat to me but too tall. Clear as mud?

Wayno

296 V8 · 05-10-2010, 07:51 PM

Rob
I have 21 1/2
Let me know if you need more info.
Greg

Mike in AZ · 05-10-2010, 08:45 PM

have seen roadster springs offered in 26"....regular height is 20"??...seat heights notice in Sacramento Vintage Ford catalog....Mike

Bishop Welding · 05-13-2010, 10:18 AM

Sponsored Links (Register now to hide all advertisements)

Sold

05-10-2010, 01:53 PM	#1
Bishop Welding Junior Member Join Date: May 2010 Posts: 21	1936 Ford Seat, Need Information / Measurement sold Last edited by Bishop Welding; 06-09-2010 at 09:07 PM.

05-10-2010, 03:56 PM	#2
Elmo Rodge Senior Member Join Date: May 2010 Location: Salina, Utah Posts: 326	Re: 1936 Ford Seat, Need Information / Measurement Rob, the rear corners on a FRONT seat of a Fordor curve forward. Rounded off like a T Touring, if you know what I mean. Yours looks more like a rear seat to me but too tall. Clear as mud? Wayno __________________ Life is not a spectator sport.

05-10-2010, 07:51 PM	#3
296 V8 BANNED Join Date: May 2010 Location: nor~cal Posts: 455	Re: 1936 Ford Seat, Need Information / Measurement Rob I have 21 1/2 Let me know if you need more info. Greg

05-10-2010, 08:45 PM	#4
Mike in AZ Senior Member Join Date: May 2010 Location: Waddell, AZ Posts: 2,540	Re: 1936 Ford Seat, Need Information / Measurement have seen roadster springs offered in 26"....regular height is 20"??...seat heights notice in Sacramento Vintage Ford catalog....Mike

05-13-2010, 10:18 AM	#5
Bishop Welding Junior Member Join Date: May 2010 Posts: 21	Re: 1936 Ford Seat, Need Information / Measurement Sponsored Links (Register now to hide all advertisements) Sold Last edited by Bishop Welding; 06-09-2010 at 09:06 PM.