Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-02-2011, 07:14 PM   #1
jojofilo88
Member
 
jojofilo88's Avatar
 
Join Date: Sep 2011
Location: Connecticut
Posts: 48
Default Rear End Oil

Hey guys,

I have a '29 Tudor and I have a basic question for you. What types of oil are you putting in your rear end? I have a small leak at the drain plug and want to make sure it doesn't run dry. Would you recommend changing the oil ever?

Thanks,

Joe
jojofilo88 is offline   Reply With Quote
Old 09-02-2011, 07:20 PM   #2
Aerocraft
Senior Member
 
Aerocraft's Avatar
 
Join Date: May 2010
Location: Naperville, IL
Posts: 1,387
Default Re: Rear End Oil

I buy my gear lubricant from Bratton's or Snyders. Originally, it was 600W. I do recommend changing it in a car that is new to you. Just to be safe, I check it and top it off on an annual basis. I do change it every 8 - 10 thousand miles. Gar Williams
Aerocraft is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-02-2011, 07:22 PM   #3
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,117
Default Re: Rear End Oil

The Transmission, Steering gear, and Rear End all take 600W
CarlG is offline   Reply With Quote
Old 09-03-2011, 05:51 AM   #4
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Rear End Oil

Yep, 600W is what most use.. This oil is appr 250 wgt.. So you may be able to get it locally..
Patrick L. is offline   Reply With Quote
Old 09-05-2011, 04:29 PM   #5
jojofilo88
Member
 
jojofilo88's Avatar
 
Join Date: Sep 2011
Location: Connecticut
Posts: 48
Default Re: Rear End Oil

Excellent, thanks for your help guys
jojofilo88 is offline   Reply With Quote
Old 09-05-2011, 05:10 PM   #6
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Diff. Plug seepage

Sponsored Links (Register now to hide all advertisements)
To cure differential plug seepage: Wipe plug threads, smear with # 2 Permatex, install, and wipe clean. Quite normal for pipe threads to allow oil to spiral around threads and slowly seep out.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Old 09-05-2011, 07:24 PM   #7
Bruce Adams
Senior Member
 
Bruce Adams's Avatar
 
Join Date: May 2010
Location: Northport, NY
Posts: 1,597
Default Re: Rear End Oil

Drain the old stuff and refill with some new 600W from the vendors.
Try either Permatex # 2 which always stays soft, or teflon tape on the threads.
Bruce Adams is offline   Reply With Quote
Old 09-05-2011, 08:45 PM   #8
jojofilo88
Member
 
jojofilo88's Avatar
 
Join Date: Sep 2011
Location: Connecticut
Posts: 48
Default Re: Rear End Oil

Thanks for your input! I was thinking of teflon taping it as well, but i'll try the Permatex if it does not work.
jojofilo88 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:44 PM.