|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-25-2014, 12:37 PM | #1 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
31' Generator Update: working :)
So to review: I tried to lower the generator output by moving the 3rd ring but I suspect I might have messed things up so I took the generator off and discovered the 3rd ring was frozen --it never really moved... I figure maybe I knocked off a wire or something. So I took off the generator.
Armature shot: https://www.youtube.com/watch?v=IXU9U6cGl68 End cap and 3rd ring: https://www.youtube.com/watch?v=94j8doUPgGY You'll see why here: two small metal spurs: so I took a very fine file and removed them. https://www.youtube.com/watch?v=vh-HtwW_tvQ https://www.youtube.com/watch?v=yYlpy75GdA4 Cleaning up the 3rd ring and putting the generator back in and at idle, 0A, and I took a guess to as where the now MOVABLE 3rd ring might be... I got 8A as I hit the accelerator and as it returned to idle speed the cutout did it's thing 0A. https://www.youtube.com/watch?v=5MPM...srmu_STYU2O4ig Aside from the spurs on the 3rd ring.. not sure why but for now I'll take it...
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio Last edited by mshmodela; 07-25-2014 at 04:42 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|