|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-16-2012, 08:17 AM | #1 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
radius ball grease fitting
anybody ever put a grease fitting on radius ball cap and what is drill and tap size or is it a bad idea
|
07-16-2012, 08:59 AM | #2 |
Senior Member
Join Date: May 2010
Location: santa cruz, calif
Posts: 2,011
|
Re: radius ball grease fitting
if your set up is stock Model A, then enough oil should leak out the transmission and engine to keep the ball oiled. Its designed for that. But if you have the transmission shift rails end plugged with that accessory from Mitchells, a sealed front bearing on the transmission main shaft and the engine doesn't leak a drop, or if you have the V8 conversion to hold the radius ball, then a means to lube it is a good idea.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-16-2012, 09:31 AM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: radius ball grease fitting
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|