The Ford Barn

Ron/IA · 04-06-2015, 06:02 PM

What is the diameter of the transmission input shaft where the flywheel pilot bearing goes.

I am not having any luck finding this info in my material.

Thanks,

Mitch//pa · 04-06-2015, 06:36 PM

the pilot bearing bore is
0.6693 inch (17.000 mm)

Ron/IA · 04-06-2015, 06:52 PM

Sponsored Links (Register now to hide all advertisements)

Thank you, Mitch. I have caliper in hand to check the shaft.

04-06-2015, 06:02 PM	#1
Ron/IA Senior Member Join Date: May 2010 Location: Amana IA Posts: 527	Pilot Bearing What is the diameter of the transmission input shaft where the flywheel pilot bearing goes. I am not having any luck finding this info in my material. Thanks, __________________ Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/

04-06-2015, 06:36 PM	#2
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Pilot Bearing the pilot bearing bore is 0.6693 inch (17.000 mm)

04-06-2015, 06:52 PM	#3
Ron/IA Senior Member Join Date: May 2010 Location: Amana IA Posts: 527	Re: Pilot Bearing Sponsored Links (Register now to hide all advertisements) Thank you, Mitch. I have caliper in hand to check the shaft. __________________ Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/