The Ford Barn

Smitty · 12-20-2017, 03:30 PM

I things cleaned up nicely just wondering about lubrication. I would say bushings with lubriplate? Should I lube the advance weights or leave them dry?
Thanks, Steve

flatheadmurre · 12-20-2017, 03:47 PM

I´m not a fan of grease anywhere else then on the cam in a distributor.
I prefer oil on the rest.

BillM · 12-20-2017, 08:29 PM

Sponsored Links (Register now to hide all advertisements)

You might consider lubing the wick inside the shaft:Click the link below:
http://myplace.frontier.com/~wgmumaw...Oil%20Wick.jpg

12-20-2017, 03:30 PM	#1
Smitty Senior Member Join Date: May 2010 Location: Boston North Shore Posts: 752	Rebuilding the Crab I things cleaned up nicely just wondering about lubrication. I would say bushings with lubriplate? Should I lube the advance weights or leave them dry? Thanks, Steve

12-20-2017, 03:47 PM	#2
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: Rebuilding the Crab I´m not a fan of grease anywhere else then on the cam in a distributor. I prefer oil on the rest.

12-20-2017, 08:29 PM	#3
BillM Senior Member Join Date: May 2010 Location: Everett, WA Posts: 504	Re: Rebuilding the Crab Sponsored Links (Register now to hide all advertisements) You might consider lubing the wick inside the shaft:Click the link below: http://myplace.frontier.com/~wgmumaw...Oil%20Wick.jpg __________________ My web page: http://myplace.frontier.com/~wgmumaw/