Go Back   The Ford Barn > The Swap Meet > Wanted > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-13-2012, 04:34 PM   #1
Mike in Mass
Senior Member
 
Mike in Mass's Avatar
 
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
Default wiring harness 39 pic-up

City: plymouth
State: ma

hey guys trying to locate a supplier for a harness for my truck . I have an NOS one but its really brittle around the ends and I can crack the cloth coating off of it . tried 101carparts.com ,,painless wiring , nobody goes back far enough, thanks mike p
Mike in Mass is offline   Reply With Quote
Old 04-13-2012, 07:42 PM   #2
40fordpu
Senior Member
 
40fordpu's Avatar
 
Join Date: Jun 2010
Location: Murrieta, CA
Posts: 637
Default Re: wiring harness 39 pic-up

I might have a nos truck one in my garage. Check this weekend for ya. If you dont hear from me then remind me. I would sell it to you for what I bought it for. (I have a 1940 truck and thought they might be the same)
40fordpu is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-13-2012, 08:46 PM   #3
swoopNZ
MEMBER EMERITUS
 
Join Date: May 2010
Location: New Zealand
Posts: 1,380
Default Re: wiring harness 39 pic-up

Tyree Harrris makes a good product..
swoopNZ is offline   Reply With Quote
Old 04-13-2012, 10:09 PM   #4
TK in LA
Senior Member
 
TK in LA's Avatar
 
Join Date: May 2010
Location: La Verne, Ca.
Posts: 826
Default Re: wiring harness 39 pic-up

I have one on Greedy bay 200742366126 and another as shown.The one in the picture is P/N 91C 14401 C which is correct for commercial. The one on greedy is a 91C 14401B and says it's for the cowl on a 2 brush generator in a '39 closed cab or panel. Both are NOS, dirty but complete. If interested, just let me know.
Tom
Attached Images
File Type: jpg 39 Truck.jpg (69.3 KB, 4 views)
TK in LA is offline   Reply With Quote
Old 04-14-2012, 02:25 AM   #5
oldrelics
Senior Member
 
Join Date: May 2010
Location: Canada
Posts: 571
Default Re: wiring harness 39 pic-up

I'd buy a repro before buying a crusty NOS piece....do you smell smoke?

The harness looks to be available at most of the Vintage Ford suppliers.

C&G Early Ford shows:

91C-14401A 39Pickupw/3 brush generator, with amp gauge $150.82 ea

91C-14401B 39Pickupw/2 brush generator & volt gauge $113.84 ea

91C-14401C 39Pickupw/2 brush generator & amp gauge $169.90 ea
oldrelics is offline   Reply With Quote
Old 04-14-2012, 06:07 AM   #6
39wdy
Senior Member
 
Join Date: Jun 2011
Location: Vermont
Posts: 226
Default Re: wiring harness 39 pic-up

Sponsored Links (Register now to hide all advertisements)
Hi Mike,
I'd go with the reproduction harness as well. I originally used an NOS harness and ended up five years later replacing it with a repro. It's much easier to do when the truck is all apart. I did; however, successfully use an NOS harness on the tail lights but that location is much easier to repair or replace if you have a problem. Did you solve your steering problem? I'll see you at Fitchburg.
Toby
39wdy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:12 AM.