|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-16-2013, 08:40 PM | #1 |
Member
Join Date: Feb 2011
Location: Kingwood, Texas
Posts: 80
|
Aluminum Z Head Saver
I recently acquired a 1915 roadster with an aluminum Z head. I was told that these type of heads tend to deteriorate if you do not use a "head saver". I got the pictured head saver part from one of the parts vendors. Can this part be installed in the water outlet as pictured below? Thanks for your feedback.
|
04-16-2013, 09:17 PM | #2 |
Member
Join Date: May 2012
Location: Wadsworth, Ohio
Posts: 36
|
Re: Aluminum Z Head Saver
Yes, you can do that, but be sure to add a little silicone around the wire, you can't squeeze the rad tube enough to eliminate a leak if installed this way. I just hang mine on the overflow tube in the neck of the rad, in a couple of years they're gone and I hang another.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-16-2013, 09:36 PM | #3 |
Member
Join Date: Feb 2011
Location: Kingwood, Texas
Posts: 80
|
Re: Aluminum Z Head Saver
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|