|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-14-2012, 01:45 PM | #1 |
Junior Member
Join Date: Oct 2012
Location: Ottawa, Ontario
Posts: 2
|
'31 Murray Body Number Plates
I have been searching for years, trying to find the proper format for creating a replacement Body Number Plate for my 1931 Murray Fordor. I know as an example, that it might appear as M-460-12345. My questions are: 1. what is the significance of the 460 ( is it assembly plant, body type) and 2. the 12345 I presume is just the next assembly line number, not the serial number of the car. I appreciate any information and pictorial detail you may be able to provide.
Paul |
10-14-2012, 03:34 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
The first three numbers represented the manufacturers body type. For the most part they have no correlation to Ford's numbering. The trailing numbers were the manufacturers serial number. I'm pretty sure that in all cases Murray preceded their body type number with "M". Briggs did not precede the number with anything.
As an example of the seeming random body type number, a 1930 or 1931 STRAIGHT windshield Murray bodied Town Sedan was Ford's model 155-C. Murray's designation for that body was M604. I have no idea what Murray's number was for the 165-C Standard Fordor. With introduction of the slant windshield models Briggs numbers remained seemingly disconnected. However Murray adapted Ford's body type number so a slant windshield Town Sedan would be M160B xxxx I believe. Is your car a slant windshield model? If so, how did you determine it was built by Murray?
__________________
http://www.abarnyard.com/ |
Sponsored Links (Register now to hide all advertisements) |
|
10-14-2012, 03:51 PM | #3 |
Junior Member
Join Date: Oct 2012
Location: Ottawa, Ontario
Posts: 2
|
Re: '31 Murray Body Number Plates
Thanks Marco. Mine is a straight windshield. I appreciate your explanation of the numbering. The car was built at the Danforth plant in Toronto and there is an assembly line number stamped in the wood subframe, prefixed with a T. I would probably be safe in using the numbers following the T, simply for my own satisfaction.
|
10-17-2012, 11:41 PM | #4 | |
Senior Member
Join Date: Jun 2011
Location: Charlottesville, Virginia
Posts: 364
|
Re: '31 Murray Body Number Plates
Quote:
|
|
10-18-2012, 12:38 AM | #5 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
Re: '31 Murray Body Number Plates
If your car was built at Toronto & has ''T ......'' stamped into the floor wood, it was not therefore built by Murray in the US, & would not have a Murray #.
These straight windsheild sedans were sometimes built in ''foreign'' plants eg. Geelong ,Australia & Manchester England. The ones sent to New Zealand & Sth Africa were stamped ''3F/5F'' [stylised F] in 1930 '31 & were assembled at the main Ontario Plant [ Ford, Ontario], Canada. |
10-18-2012, 03:18 AM | #6 |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: '31 Murray Body Number Plates
Sponsored Links (Register now to hide all advertisements)
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
10-18-2012, 12:38 PM | #7 | |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
Quote:
That takes us back to the Murray body tags. Were there actually some straight windshield Murray bodies delivered without body tags? If so, were there holes for such a tag present in the firewall?
__________________
http://www.abarnyard.com/ |
|
10-18-2012, 04:35 PM | #8 |
Senior Member
Join Date: Nov 2010
Location: Ottawa,Ontario, Canada
Posts: 271
|
Re: '31 Murray Body Number Plates
I'm not an expert in relation to the numbering systems but it was mentioned that the Murray numbers have no correlation to the Ford numbering system.
Is one number on the car represented by the manufacturer (say Briggs or Murray) while another number may be stamped on it to indicate assembly plant? Murray and Briggs sent alot of their body assemblies to the various Ford plants didn't they? |
10-18-2012, 05:11 PM | #9 |
Senior Member
Join Date: Jul 2011
Location: shelby, nc
Posts: 201
|
Re: '31 Murray Body Number Plates
any one have a picture of a Murry plate - that would be mint!
|
10-18-2012, 06:46 PM | #10 |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: '31 Murray Body Number Plates
"The couple Canadian S/W bodies I've studied were clearly imported from the USA in sections and assembled in Canada. These obviously would have no body tags like many of those produced and sold here in the USA."
I am not sure about the 160 series bodies, but the Victorias were assembled by the Canadian Top and Body Corporation Ltd. Tilbury Ontario. I know they produced Deluxe Coupes in 1932 for Ford Canada.
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
10-18-2012, 11:31 PM | #11 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
Re: '31 Murray Body Number Plates
Ive been interested in trying to track the origins of the Canadian Model A's here in NZ for a few years now.
Re the Canadian Murray style 3W fordor straight windscreen jobs, none Ive seen here have had Murray body plates as per the US ones. This is except for the 1929 3W fordors which usually have the Murray coachwork badge on the lower r/h cowl corner. They are not drilled or punched for a body plate; in fact the Canadian cars had no ford data plate at all attached after 1928. As Marco says, the Canadian assembled sedans probably used US Murray stamped panels but they were jigged up & welded in Canada & show use of Robertsons throughout. Therefore my opinion is that they should not have a Murray body plate? In Europe, similar body assembly of the Briggs 3W fordors occurred, with Manchester plant adapting them to the different export & home market requirements There has been some great work done by the Model T guys [Hap Tucker]on US & Canadian Ford body #s which helped sort out Canadian & Australian body assembly. Also an interest in early V8 assembly is valuable to sort out the Model A era. |
10-19-2012, 12:35 AM | #12 | |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
Quote:
For example the door sheet metal was final formed around the wooden frame with the jamb skins installed to the wood first and then the outer skin positioned by the window opening in the wood and then the perimeter was folded over the jamb skins and spot welded. Similarly, the body skins were installed around a complete wooden frame that was sized as sub-assemblies but completely assembled in jigs (including the cowl assembly) before the skin (or skins) could be attached. There is way more to it than I can describe here but the method of manufacturing didn't leave many options. Finally, it's worth noting that until about April-May 1930 the Murray and Briggs body tags were nailed to the wood floor sills near the front floor boards. These are often lost due to bad wood, etc., so the lack of such a tag must be considered.
__________________
http://www.abarnyard.com/ |
|
10-19-2012, 01:06 AM | #13 | |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
Re: '31 Murray Body Number Plates
Quote:
|
|
10-19-2012, 03:35 AM | #14 |
Senior Member
Join Date: May 2010
Location: Dallas
Posts: 524
|
Re: '31 Murray Body Number Plates
The feb 31 Murray town sedan I'm working on now shows no signs that it ever had a Murray tag on the firewall but my A400 does have the tag. I wonder what determined which car got a tag on the wall and which cars got it on the door wood etc?
__________________
DMAFC |
10-19-2012, 04:42 AM | #15 |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: '31 Murray Body Number Plates
Here are a couple from Victorias
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
10-19-2012, 04:55 AM | #16 | |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: '31 Murray Body Number Plates
Quote:
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
|
10-19-2012, 10:28 AM | #17 | ||
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
Quote:
I've never seen either a Victoria or straight windshield Fordor from Canada or I'd be able to outline even the most subtle differences. If these models had Robertson screws in the body construction there are only two possible explanations I can see. First would be a Murray plant in Canada beginning in 1931. Unfortunately I haven't found anything else to support this and I've tried for a few years now. Second would be that due to the volume of Murray bodies coming into Canada there may have been a requirement for "domestic content" where Murray would use things such as trim fabrics, seat springs, screws, etc., manufactured in Canada. There certainly could be another scenario but I can't see one. Quote:
Ford Australia was definitely a unique situation all it's own. The Australian Town Sedan shown here a few months back was VERY enlightening. It is somewhat a facsimile of a Murray body but a little different in essentially every respect. With the possible exception of the cowl there is not another piece interchangeable with a Murray body.
__________________
http://www.abarnyard.com/ |
||
10-19-2012, 10:36 AM | #18 |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
What are the indications that they had any involvement with the Victoria?
__________________
http://www.abarnyard.com/ |
10-19-2012, 01:39 PM | #19 | |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: '31 Murray Body Number Plates
Quote:
Recently there was a very complete unrestored one for sale on ebay. It was unique in that it still had the original leather upholstery offered by Ford Canada for an extra $18. Photo courtesy "The Bustle" Editor Tom Endy and CMAFF. A-8-2 in the 1932 Ford book by David Rehor shows two different 'Tilbury' tags used on the 1932 Canadian deluxe coupe bodies.
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
|
10-20-2012, 11:31 AM | #20 | |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: '31 Murray Body Number Plates
Quote:
Although I can't recite specific details but I'm sure those that have researched the Canadian auto industry of the period know that Canada did control/limit imports. My best guess is that Canadian body and Top Corp was used as an intermediary beginning late 1930 or 1931 as a means to work around those issues and played a very limited roll in actual "construction" of the Murray bodies but their assigned body serial numbers was part of the process to make it "official". I have about 150 photos of #488. I spent a bit of time studying them this morning. It surprised me based on this thread that there is not a single Robertson screw used in the assembly and trimming of the body including the dash rail. That indicates to me that the body was shipped from Murray completely painted (base color) and trimmed which was common practice here. Of course those items added on the assembly line such as instrument panel, floor boards, etc., were installed with Robertson screws.
__________________
http://www.abarnyard.com/ |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|