|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-17-2012, 11:05 AM | #1 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
lots of 57 Ford Parts
City:
stratford
State:
ct
Price:
in ad
I will be adding more as I am able. I have a lot I need to sort through, picture and post. If you need something I haven't listed yet, shoot me a PM asking.
DO NOT POST IN THIS THREAD, SENT A PM IF YOU ARE INTERESTED IN SOMETHING. I have doubles and even tripples of alot of things, so it's not just what you see on the car, so feel free to ask. I will take pictures of anything you like. You are more than welcome to set up and time and date with me to look at anything you like. I will be keeping the motor whole, and selling it whole. I will keep it able to run so I can demo it to someone, aka no manifolds, carb, bellhousing, intake etc. Parts start at $5 and on up. Willing to deal if you want to get more than one thing. Just let me know what you need, and shoot and offer. I will take paypal, USPS money order, or CASH in hand. No checks, no dibs, no bs. I AM OPEN to trades, tel me what you want, and whatcha got. Worst I can say is no. I'd be open to tool, auto parts (hot rod, custom, etc) and other non car related things, give it a try, you never know. I have a 56 fairlane 500 and 56 vicky. I do need some sheet metal for the vicky (floor, rocker, quarter, fender, door patches), a fuel cell (16-25 gal), a set of seat belts to put in it (black) and probably some other stuff too. I also need a single gauge cup for a 2 1/6" gauge. The car and most parts are located in Stratford, CT. Some parts are located in Hamden CT, I can move parts to Either or if it gets it closer to you, except for an engine. I will be listing individually as I can, but for now here are some shots of the whole car I am parting. Please understand, I have ALOT to sort through, and alot on my plate. Getting things up here will take me some time. There are a lot more parts that are not listed out here. Like 12+ hub caps, spindles, drums, a arms, steering components, another front half of the frame other than the one I already sold, vent glass (like 6 or so) and a whole bunch more. 57 292 Yblock - Complete carb to pan, no air cleaner. Comes with dizzy, water pump, manifolds,coil, wires, plugs, and motor mounts. Accel pump needs a new gasket, it leaks. Alternator doesn't work. Running condition. - $700 57 3 speed tranny - Shifted for a driveway test run. Have never driven on it. $250 IF YOU WOULD LIKE THE MOTOR & TRANNY - $850 57 Radiator - No leaks, pet cock worked great to drain the coolant - SOLD (x2) 57 Front bumper - $150 (x2) 57 Rear bumper - BOTH SOLD 57 Custom 300 complete pass rear door (glass, knobs, handles, panel etc - only whole) - $120 57 Custom 300 complete driver rear door(glass, knobs, handles, panel etc -only whole) -$120 57 Fairlane PASS fender -SOLD 57 Fairlane DRIVER fender -SOLD 57 Cusom 300 Driver Fender - SOLD 57 Fairlane Hood -SOLD 57 custom 300 hood - $125 57 custom 300 trunk lid - -SOLD 57 Custom 300 trunk lid lock and emblem - SOLD 57 Fairlane trunk lid - only good for the outter skin - -SOLD (x2) 57 trunk hinges - $25 pair (x2) 57 hood hinges - -SOLD 57 trans support - $40 57 custom 300 quarters (cut from a car) some rust at the bottoms -SOLD 57 custom 300 front half of the frame (a arms, spindles, coils, drums ) - SOLD 57 custom 300 front door glass (D+P) - $40 ea 57 straight six complete head and lifter (has one broken rocker) - SOLD 57 Straight six cam shaft -SOLD 57 straight six motor mounts - SOLD 57 straight six torque converter and bell housing - $120 61 (ish) ford auto tranny (fluid cooled type, needs a cooler, comes with bell housing and converter) - $250 57 custom 300 rear end (complete drum to drum, spins free, open rear, gears unknown - was mated to a straight six car) - SOLD 57 custom 300 grille (both sides) -SOLD 57 Fairlane grille (both sides, driver side needs mount repair) $30 57 Fairlane front windshild (minor fog in corners, can take pics - LOCAL PICK UP ONLY) - $125 57 Fairlane rear windshild - (LOCAL PICK UP ONLY)- $150 57 fairlane inner fenders (P+D) - BOTH SOLD 57 Fairlane Front Bench seat - SOLD 57 Fairlane rear bench (upper and lower) $100 57 Fairlane Antenna (don't know if it is stock or not) SOLD 57 fairlane 4 dr drive shaft, includes u joints of unknown condition and slip yoke for 3 speed manual tranny - 16 Splines on slip yoke) - $125 57 Fairlane 3 speed manual tranny - for 16 spline slip yoke - $200 57 Fairlane complete dash - Some of it sold, to many pieces to list individually 57 fairlane three on tree column - $125 57 fairlane rear view mirror - -SOLD 57 Steering wheel with horn ring $50 57 horn ring - $20 57 Rear end complete drum to drum - SOLD 57 Fairlane leaf springs (as a set)- $80 57 Custom 300 leaf springs (as a set) --SOLD 57 Fairlane gas tank, cap and straps (needs a cleaning and coating- CANNOT SHIP THIS ) -SOLD 57 Fairlane rear License plate bracket - -SOLD 57 Fairlane 4 dr B pillar Interior upper and lower trim (both sides) $50 ea 57 Fairlane rear winshield trim - -SOLD 57 fairlane front windshield trim - -SOLD 57 Fairlane Town Sedan or fairlane side trim (the trim on the sides of the grey/white car shown)- $200 Last edited by venturesomerite; 10-04-2012 at 10:50 PM. Reason: updates |
04-17-2012, 11:05 AM | #2 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Skirts, driver side needs the lip repaired. - $75 plus ship Pass side tail light housing $ - 50 plus ship Driver side taillight housing - $50 plus ship Intake #1 - $115 plus ship Instrument cluster #1 - $35 Last edited by venturesomerite; 04-22-2012 at 12:18 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-19-2012, 07:55 PM | #3 |
Senior Member
Join Date: May 2010
Location: onalaska , wisconsin
Posts: 535
|
Re: lots of 57 Ford Parts
I would be interested in the exhaust manifolds, intake manifold, distributor, heater blower motor with cage, throttle linkage, from carb to pedal., instrument cluster, dash clock. Let me know total price, I can figure shipping if you use Fed Ex.
Thanks, Steve |
04-19-2012, 09:40 PM | #4 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Glove Box Cover #1 - $30 plus ship
Speaker Grill # 1 - $10 plus ship Speedo Cable with gear #1 - $15 plus ship Blower motor #1 (I hooked it to a battery and both speeds work, runs quiet) Just needs to be cleaned up - $20 plus ship Wiper, R air, Choke panel and controls with cables - $20 plus ship Heater Controls - $15 plus ship Hood release, cable, bracket, latch - $20 plus ship Ignition, Lights, L air controls and panel - Missing light switch, no key for ignition - $15 plus ship Seat adjuster Knob (located on driver's side front seat) - SOLD Last edited by venturesomerite; 05-01-2012 at 10:54 AM. |
04-20-2012, 08:57 AM | #5 |
Senior Member
Join Date: May 2010
Location: onalaska , wisconsin
Posts: 535
|
Re: lots of 57 Ford Parts
OK, if you want to sell those, email me direct at [email protected] Attach some pictures if its not too much trouble and we can deal on what you got. Thanks,
Steve |
04-20-2012, 03:50 PM | #6 |
Member
Join Date: Apr 2012
Posts: 38
|
Re: lots of 57 Ford Parts
Sponsored Links (Register now to hide all advertisements)
|
04-20-2012, 10:32 PM | #7 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
41 Ford hub caps - SOLD
Last edited by venturesomerite; 05-01-2012 at 10:53 AM. |
04-21-2012, 10:49 AM | #8 |
Junior Member
Join Date: Jan 2012
Posts: 6
|
Re: lots of 57 Ford Parts
I need the seat adjuster knob.
|
04-22-2012, 12:01 PM | #9 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
57 Ford windshield outter trim - $150 + ship
Last edited by venturesomerite; 05-01-2012 at 11:13 AM. |
04-22-2012, 12:01 PM | #10 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Here is are some current pictures of the car, every thing you see missing if off, and ready for sale. PM for specific pictures of things. Although you can't see, the rear bumper and tail light housings, and gas tank are off as well.
Also, have this front frame with sway bar, coils, arms and complete brakes. Will sell it whole or just what you need. Willing to cut this half frame up too if you just need a certain part. $325 for the whole thing, or we can work out a deal for what you want. Also, Custom Cruiser tires on 57 ford rims If I recall corectly on rim looked different than the others (trim rings shown not included). About 200 mile on them. $400 Last edited by venturesomerite; 05-31-2012 at 09:58 PM. |
04-22-2012, 12:01 PM | #11 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
reserved for more part pictures
|
04-22-2012, 12:13 PM | #12 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Can some one please delete the posts out of this thread (that aren't mine), along with this one so I can post more pictures all together?
|
05-01-2012, 10:54 AM | #13 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
updated with sold parts.
Will also be adding 12 rims, 8 with crap tires, 4 with brand new (200 miles) 3" white walls. Gotta get pictures. Last edited by venturesomerite; 05-01-2012 at 11:19 AM. |
05-03-2012, 02:48 PM | #14 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
If you need something, let me know. Make an offer, come look, let's work something out.
|
05-08-2012, 11:12 PM | #15 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
bump
|
05-24-2012, 07:39 PM | #16 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Bttt
Last edited by venturesomerite; 05-29-2012 at 09:25 PM. |
05-29-2012, 09:25 PM | #17 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
BUMP, tell me what you want and make an offer. I'll also barter for tools, a project motorcycle, quad, or maybe some FE parts, just try me. You never know.
|
06-04-2012, 11:45 AM | #18 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Bump.....
|
06-07-2012, 11:02 AM | #19 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
Updated, some parts sold. There is much more than I have listed individually, so ask if you need it.
|
06-17-2012, 09:54 PM | #20 |
Member
Join Date: Apr 2012
Location: Stratford, CT
Posts: 68
|
Re: lots of 57 Ford Parts
bump
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|