02-05-2016, 11:44 AM | #1 |
Senior Member
Join Date: Jun 2014
Location: Canton, CT
Posts: 206
|
'38 Cowl Vent
I'm in the process of putting my '38 Tonner cab back together after finally having gotten it back from the painter. The problem is that I now realize I did not have all of the parts for the cowl vent before I took the truck apart 1 1/2 years ago. What I'm missing is the lever mechanism for moving the vent, and I'm not exactly certain what I'm looking for. I have the vent-deflector and the pivot or hinge plate which is attached to the dash. The lever mechanism would appear to mount to the fire wall by means of a horizontal plate and to the hinge plate at the center perpendicular protrusion. I'm attaching pictures. I located a mechanism (3rd picture, unpainted metal) which I suspect could be what I'm looking for. Is this the correct lever mechanism? Or, am I looking for something else? I'd appreciate input and direction.
Thank you... Bob Last edited by revenski; 02-08-2016 at 03:29 PM. |
02-05-2016, 10:33 PM | #2 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,165
|
Re: '38 Cowl Vent
|
Sponsored Links (Register now to hide all advertisements) |
|
02-05-2016, 10:59 PM | #3 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,064
|
Re: '38 Cowl Vent
__________________
Works good Lasts long time |
02-06-2016, 06:50 PM | #4 |
Senior Member
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,996
|
Re: '38 Cowl Vent
Sponsored Links (Register now to hide all advertisements)
Both Bruce and Bill had some good input on that June thread. Scott |
|
|
Sponsored Links (Register now to hide all advertisements) |
|