Pictures of a 1952 Ford car automatic steering column

[38 Conv]

Need pictures of a 1952 Ford CAR automatic steering column. want to see if it is what is installed in my truck

[jplutz]

38,
Do you need interior or engine compartment pics? or both?
I have a 52 Mainline Fordo-Magic V8. JPL

[mercman from oz]

1952 Ford with Fordomatic from the Sales Brochure.
Is this what you are looking for?

[38 Conv]

I need the automatic part and shift indicator--what I have is I THINK a 1951-52 steering column automatic with a 1953-56 F-100 steering wheel in my 54 F-100 and want to go a SMALLER steering wheel-- Column & steering wheel in pictures is what is installed in my truck--Thanks

[petehoovie]

Originally Posted by 38 Conv

I need the automatic part and shift indicator--what I have is I THINK a 1951-52 steering column automatic with a 1953-56 F-100 steering wheel in my 54 F-100 and want to go a SMALLER steering wheel-- Column & steering wheel in pictures is what is installed in my truck--Thanks

[jplutz]

Sponsored Links (Register now to hide all advertisements)

38,
Attached, find some pics of my interior. It's the 52 on my avator. Sorry for the poor quality, my yard is swarming with gnats; they were all over me in the car. I have 2 bar steering wheel, I see that yours is a 3; perhaps from a 51. Hope this helps. Good luck, JPL

[petehoovie]

Originally Posted by jplutz

38,
Attached, find some pics of my interior. It's the 52 on my avator. Sorry for the poor quality, my yard is swarming with gnats; they were all over me in the car. I have 2 bar steering wheel, I see that yours is a 3; perhaps from a 51. Hope this helps. Good luck, JPL

[jplutz]

Thanks pete. JPL

[jplutz]

38, Sorry about the 51 comment, I should have re-read your text. JPL

[38 Conv]

[B]]

Thanks sure looks like what is in my truck--I know the steering wheel is a 1953-55 Ford F-100 truck----- Thanks

[TJ]

The diecast piece that holds the indicator is usually worn so bad that the shift lever will not stay in park. I don't know of any way to repair the diecast. If this is what you need I could send you a used one that you could play with to see if you could repair the diecast. send me a PM.

[tubman]

Originally Posted by TJ

The diecast piece that holds the indicator is usually worn so bad that the shift lever will not stay in park. I don't know of any way to repair the diecast. If this is what you need I could send you a used one that you could play with to see if you could repair the diecast. send me a PM.

JB Weld, or perhaps some other high-zoot epoxy, such as Belzona or Dev-Con?

[rotorwrench]

Have it 3D printed in one of the late type resins.