|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-23-2014, 12:34 AM | #1 |
Junior Member
Join Date: Dec 2011
Location: Fremont, CA
Posts: 2
|
1936 front fender brace 4dor
Does anyone have a picture they could post of the underside of a front fender showing the fender brace for the above auto?
Thanks so much! |
11-23-2014, 01:19 AM | #2 |
Senior Member
|
Re: 1936 front fender brace 4dor
I will after church tomorrow if no one else does beforehand.
__________________
Tim Carlig |
Sponsored Links (Register now to hide all advertisements) |
|
11-23-2014, 11:14 AM | #3 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: 1936 front fender brace 4dor
Take a look on pg. 70 of the 1935-36 Ford Book
Don |
11-23-2014, 11:51 AM | #4 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: 1936 front fender brace 4dor
The pix that Don posted is short and to the point, maybe with a couple of explanations..
The fender brace shown attaches to the front of the frame, adjacent to the radiator.. The mount also serves as the mount for the headlight..
__________________
Bill.... 36 5 win cpe |
11-23-2014, 01:14 PM | #5 |
Senior Member
|
Re: 1936 front fender brace 4dor
Hope this helps....R/F.
__________________
Tim Carlig |
11-23-2014, 11:16 PM | #6 |
Junior Member
Join Date: Dec 2011
Location: Fremont, CA
Posts: 2
|
Re: 1936 front fender brace 4dor
Sponsored Links (Register now to hide all advertisements)
Can I get you to do a picture showing the piece Don posted, installed? Thanks much! |
11-23-2014, 11:49 PM | #7 |
Senior Member
|
Re: 1936 front fender brace 4dor
My car is a July/36 build but doesn't have that brace the arrow in Don's photo is pointing to on either side.
__________________
Tim Carlig |
11-24-2014, 10:10 AM | #8 |
Senior Member
Join Date: May 2010
Location: Irving, Texas
Posts: 598
|
Re: 1936 front fender brace 4dor
Here you go. Ed
|
11-24-2014, 10:46 AM | #9 |
Senior Member
|
Re: 1936 front fender brace 4dor
I stand corrected. It can barely be seen under the horn. One end can be seen to the left of the lower radiator hose, at 2o'clock from the motor mount. The other end is a peek view to the right of the lower horn bracket bolt. Ed's pic is a clear shot since there's no horn.
__________________
Tim Carlig Last edited by dean333; 11-24-2014 at 10:51 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|