The Ford Barn

TD · 02-07-2012, 02:49 PM

Does anyone have a picture of the rear motor mount plates on the outside of the frame. I am wondering if my cotter pins should be double bent, split side to side, cut or bent over the center of the bolt.

Bob C · 02-07-2012, 03:36 PM

Here is a link to Marco's site showing the cotter pins.
They are in gallery 6, 5th picture down.
http://www.abarnyard.com/roadster2/index.htm

Bob

msmaron · 02-07-2012, 03:51 PM

They are like all cotter pins, bent over and down the side.

TD · 02-07-2012, 05:43 PM

Sponsored Links (Register now to hide all advertisements)

thanks

02-07-2012, 02:49 PM	#1
TD Senior Member Join Date: Jul 2011 Location: shelby, nc Posts: 201	rear motor mount cotter pins Does anyone have a picture of the rear motor mount plates on the outside of the frame. I am wondering if my cotter pins should be double bent, split side to side, cut or bent over the center of the bolt.

02-07-2012, 03:36 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,741	Re: rear motor mount cotter pins Here is a link to Marco's site showing the cotter pins. They are in gallery 6, 5th picture down. http://www.abarnyard.com/roadster2/index.htm Bob

02-07-2012, 03:51 PM	#3
msmaron Senior Member Join Date: May 2010 Location: Wauconda, IL Posts: 3,600	Re: rear motor mount cotter pins They are like all cotter pins, bent over and down the side. __________________ Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe

02-07-2012, 05:43 PM	#4
TD Senior Member Join Date: Jul 2011 Location: shelby, nc Posts: 201	Re: rear motor mount cotter pins Sponsored Links (Register now to hide all advertisements) thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode