The Ford Barn

slowforty · 06-28-2016, 07:38 PM

http://theflat-spot.com/2016/06/28/i...3-speed-trans/

I stole this off The Flat-Spot Site

Some good information

35fordtn · 06-28-2016, 07:53 PM

Don't guess he noticed he is missing one of the balls in the synchro.

JM 35 Sedan · 06-29-2016, 07:54 AM

Also, what he is calling a '38 transmission would not have had the later brass ring synchronizers, hub, and collar that came out in '39. As always, the best source of info on these early Ford 3 speed transmissions is Mac VP and his book on this subject.

19Fordy · 06-29-2016, 08:50 AM

Moral: Don't make a video just because you can.

slowforty · 07-01-2016, 06:57 AM

Sponsored Links (Register now to hide all advertisements)

Well the pipe vice mount was a good idea. And you did get to look inside the trans without getting dirty. Even thought the information was sketchy.

06-28-2016, 07:38 PM	#1
slowforty Senior Member Join Date: May 2010 Location: Tinley Park Ill Posts: 1,061	Transmission inspection video http://theflat-spot.com/2016/06/28/i...3-speed-trans/ I stole this off The Flat-Spot Site Some good information

06-28-2016, 07:53 PM	#2
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,327	Re: Transmission inspection video Don't guess he noticed he is missing one of the balls in the synchro.

06-29-2016, 07:54 AM	#3
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Transmission inspection video Also, what he is calling a '38 transmission would not have had the later brass ring synchronizers, hub, and collar that came out in '39. As always, the best source of info on these early Ford 3 speed transmissions is Mac VP and his book on this subject. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 06-29-2016 at 10:27 AM.

06-29-2016, 08:50 AM	#4
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,943	Re: Transmission inspection video Moral: Don't make a video just because you can. Last edited by 19Fordy; 06-29-2016 at 10:06 AM.

07-01-2016, 06:57 AM	#5
slowforty Senior Member Join Date: May 2010 Location: Tinley Park Ill Posts: 1,061	Re: Transmission inspection video Sponsored Links (Register now to hide all advertisements) Well the pipe vice mount was a good idea. And you did get to look inside the trans without getting dirty. Even thought the information was sketchy.