Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-13-2010, 03:32 PM   #1
Lawson Cox
Senior Member
 
Lawson Cox's Avatar
 
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
Default Dash lights 35-36 Fords

Is there some trick to get the dash lights to show up in all gauges? Speedometer and gauges on left light up real well. The ones on the right side do not light up at all. The bulb burns, but will not light up the gauges. Nothing seems bent. Green plastic lens seems to be in place, but the bulb is positioned too far to the left, not directly over the green plastic "light opening". Anyone else have this problem? How did you fix it? Inquiring minds want to know. lol
Lawson Cox is offline   Reply With Quote
Old 10-13-2010, 09:13 PM   #2
Steel 35
Senior Member
 
Steel 35's Avatar
 
Join Date: May 2010
Location: Southern OR.
Posts: 222
Default Re: Dash lights 35-36 Fords

Lawson Mine must be very close to yours as the two lights are near even in the spedo, The Fuel gauge lights up the bezel & tube enough to see the fluid. The Amp and Temp Bezel is lit up but the fluid / needle are in the dark, flash light would be required dark... Hadn't played with it in the dark before.
Steel 35 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-14-2010, 07:44 AM   #3
Wltr_Mitty
Junior Member
 
Wltr_Mitty's Avatar
 
Join Date: May 2010
Location: Evergreen, CO
Posts: 20
Default Re: Dash lights 35-36 Fords

Sponsored Links (Register now to hide all advertisements)
The lighting on the outside gauges is horrible at best. I drive the car often at night and got tired of holding a flashlight... so I rigged up some high intensity LEDs from radio shack and set them over the gauge windows. There are separate windows for the needle part and the gauge face. Honestly, I don't see how the speedo bulbs could light them up alone. I spliced my LEDs into the dash light switch with bullet connectors and they pop right out to put it back to a stock configuration.
Wltr_Mitty is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:41 PM.