|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-04-2016, 10:10 PM | #1 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Metal man needed.
I had my Early '30 AA cab out being restored by a fantastic metal man. Sadly he was killed in a bicycle accident after he had it completely torn down. Now I am looking for someone who can finish the job. The body is mostly solid meta,l the lower part of the cowl is rusty. A few extra holes and cracks here and there. The doors have rust in the inside of the bottom. Of course the doors have a few dents here and there. I loaded up all the parts of it I could find or recognize. Hopefully I got it all. Can I find someone within 1,000 miles of Los Angeles to finish the job?
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
12-04-2016, 10:43 PM | #2 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Metal man needed.
Chris,
Call Chuck Kallas in Fresno 559-287-1256 He's my "Son" & a fabulous metal man! Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
Sponsored Links (Register now to hide all advertisements) |
|
12-05-2016, 12:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Re: Metal man needed.
Thank you. Message left.
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
12-05-2016, 08:36 PM | #4 |
Senior Member
Join Date: May 2010
Location: S.F.V. Cali.
Posts: 133
|
Re: Metal man needed.
You could also give the shop I work at a call. We are in Burbank.
Hollywood Hot Rods 818-842-6900 |
12-05-2016, 08:42 PM | #5 |
Senior Member
Join Date: Apr 2013
Location: Big pine Ca 93513
Posts: 797
|
Re: Metal man needed.
There was one in the Wizard of Oz
|
12-05-2016, 08:45 PM | #6 |
BANNED
|
Re: Metal man needed.
Sponsored Links (Register now to hide all advertisements)
Just finished up with a '30 roadster I wired up, did a bang up job of it. J.C.
__________________
New owner of '28 Tudor Previously owned; '30 Sport Coupe '28 left brake ccPickup '31 SW Town Sedan '28 AA Stake Bed '30 Cabriolet '42 Super Deluxe 4door Sedan "If it don't fit, get a bigger hammer. If it breaks...... ya needed a new one anyway!!" Doing a good job here is like wetting your pants in a dark suit. It gives you a warm feeling, but nobody notices. Never pass up a bathroom Never neglect an erection Never trust a fart |
12-05-2016, 10:47 PM | #7 |
Senior Member
Join Date: May 2010
Location: Fort Worth, Texas
Posts: 1,055
|
Re: Metal man needed.
I wish I was closer. Id love to bid the job for you. But it looks like you've got some good options to choose from here
__________________
Cowtown A's |
12-06-2016, 01:15 AM | #8 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,497
|
Re: Metal man needed.
There are some sick puppies on here!
Still laughing!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
12-06-2016, 08:44 AM | #9 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Metal man needed.
The TIN MAN carries an OIL CAN, would GREASE ZERKS be better What grease would work best???
Bill Quiet
__________________
"THE ASSISTANT GURU OF STUFF" |
12-06-2016, 06:06 PM | #10 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,497
|
Re: Metal man needed.
Quote:
Here we go again.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
12-07-2016, 01:00 AM | #11 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Re: Metal man needed.
Thanks for the leads.
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|