The Ford Barn

fletchlu · 10-20-2011, 04:01 PM

Does anyone know where I can find some 1934 Ford Tudor garnish mouldings. Need all of them. Will even take fiberglass. Thanks.

Barn Junk · 10-20-2011, 05:05 PM

Are you looking for std or deluxe? I have some 34s std tudor door moldings but need to find or trade for some 33 tudor door moldings before I can sell. Especially need a 33 driver's door molding. Do you know of any 33s? Rich in WA state

normleo · 10-20-2011, 07:29 PM

I have a 33 pass door call norm 507 301 8300 thanks

billy3234 · 10-22-2011, 08:52 PM

I have a full set of 1934 2dr deluxe good condition for $800.

fletchlu · 10-25-2011, 10:20 PM

Do you have pictures?

billy3234 · 10-26-2011, 02:49 PM

Sponsored Links (Register now to hide all advertisements)

Here are the pictures of the mouldings. There are 6 mouldings.

fletchlu · 10-26-2011, 02:57 PM

Just to make sure, these are for a 1934 Ford Tudor sedan. The pictures say something about a 41 Plymouth. If these are for the 34 Ford and do not have any rust holes in them and are not pitted bad, I can give you $700 for them. Let me know.

Thanks

billy3234 · 10-26-2011, 04:13 PM

These moulding have just surface rust and fit a 34 Ford 2dr. I will sell them and pay shipping for $800. dollars. The 41 plymouth was on same groupe of pictures. Bill 217 4154651

fletchlu · 10-26-2011, 04:14 PM

How do you want the money sent?

billy3234 · 10-26-2011, 05:07 PM

postal money order would be fine. Bill Kasten 522 no. 7th. st. Petersburg, Ill. 62675 Thanks Bill

fletchlu · 10-26-2011, 05:51 PM

Will you accept a cashiers check or wire transfer?

billy3234 · 10-27-2011, 07:14 AM

I would like U.S. Postal money order. Thanks Bill

fletchlu · 10-27-2011, 08:03 AM

No problem, just a little harder to get in a small town. Will try to get it today. How do you ship?

billy3234 · 10-27-2011, 10:27 AM

I'll try to send by U.S. post office, I'll let you know.

fletchlu · 10-27-2011, 10:36 AM

Do you happen to have the door jam headers and the windshield header panel also?

billy3234 · 10-27-2011, 12:06 PM

I have the header panel in good useable condition, no pictures but I have it $200. Could put it in same box. Bill

fletchlu · 10-27-2011, 12:50 PM

Do it. Will it be okay to send personal check for $200. Already have the $800 money order.

ALT

billy3234 · 10-27-2011, 12:56 PM

will take the check, will wait for check to clear before shipping. Bill

fletchlu · 12-14-2011, 11:09 PM

Still trying to find Ford Tudor door jamb headers. Any ideas????????????

mkuhn · 10-31-2012, 07:37 AM

Try Howell sheet metal out of Michigan ------I seen a jamb header listed as a new pc on
their website -------- it might be for a coupe however -------ended up making my own
from scratch for a 34 vicky

10-20-2011, 04:01 PM	#1
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	1934 Ford Tudor Garnish Mouldings City: Madisonville State: Texas Does anyone know where I can find some 1934 Ford Tudor garnish mouldings. Need all of them. Will even take fiberglass. Thanks.

10-20-2011, 05:05 PM	#2
Barn Junk Senior Member Join Date: May 2010 Location: WA state Posts: 771	Re: 1934 Ford Tudor Garnish Mouldings Are you looking for std or deluxe? I have some 34s std tudor door moldings but need to find or trade for some 33 tudor door moldings before I can sell. Especially need a 33 driver's door molding. Do you know of any 33s? Rich in WA state

10-20-2011, 07:29 PM	#3
normleo Member Join Date: Jun 2010 Posts: 86	Re: 1934 Ford Tudor Garnish Mouldings I have a 33 pass door call norm 507 301 8300 thanks

10-22-2011, 08:52 PM	#4
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings I have a full set of 1934 2dr deluxe good condition for $800.

10-25-2011, 10:20 PM	#5
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Do you have pictures?

10-26-2011, 02:57 PM	#7
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Just to make sure, these are for a 1934 Ford Tudor sedan. The pictures say something about a 41 Plymouth. If these are for the 34 Ford and do not have any rust holes in them and are not pitted bad, I can give you $700 for them. Let me know. Thanks

10-26-2011, 04:13 PM	#8
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings These moulding have just surface rust and fit a 34 Ford 2dr. I will sell them and pay shipping for $800. dollars. The 41 plymouth was on same groupe of pictures. Bill 217 4154651

10-26-2011, 04:14 PM	#9
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings How do you want the money sent?

10-26-2011, 05:07 PM	#10
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings postal money order would be fine. Bill Kasten 522 no. 7th. st. Petersburg, Ill. 62675 Thanks Bill

10-26-2011, 05:51 PM	#11
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Will you accept a cashiers check or wire transfer?

10-27-2011, 07:14 AM	#12
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings I would like U.S. Postal money order. Thanks Bill

10-27-2011, 08:03 AM	#13
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings No problem, just a little harder to get in a small town. Will try to get it today. How do you ship?

10-27-2011, 10:27 AM	#14
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings I'll try to send by U.S. post office, I'll let you know.

10-27-2011, 10:36 AM	#15
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Do you happen to have the door jam headers and the windshield header panel also?

10-27-2011, 12:06 PM	#16
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings I have the header panel in good useable condition, no pictures but I have it $200. Could put it in same box. Bill

10-27-2011, 12:50 PM	#17
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Do it. Will it be okay to send personal check for $200. Already have the $800 money order. ALT

10-27-2011, 12:56 PM	#18
billy3234 Member Join Date: May 2010 Location: Petersburg, IL. Posts: 33	Re: 1934 Ford Tudor Garnish Mouldings will take the check, will wait for check to clear before shipping. Bill

12-14-2011, 11:09 PM	#19
fletchlu Junior Member Join Date: Oct 2011 Posts: 9	Re: 1934 Ford Tudor Garnish Mouldings Still trying to find Ford Tudor door jamb headers. Any ideas????????????

10-31-2012, 07:37 AM	#20
mkuhn Junior Member Join Date: Jan 2011 Posts: 17	Re: 1934 Ford Tudor Garnish Mouldings Try Howell sheet metal out of Michigan ------I seen a jamb header listed as a new pc on their website -------- it might be for a coupe however -------ended up making my own from scratch for a 34 vicky