02-14-2018, 09:30 AM | #1 |
Junior Member
Join Date: Jan 2013
Posts: 24
|
1931 ccpu
I have a 1931 CCPU and need the dimensions for the door glass.
|
02-14-2018, 10:17 AM | #2 |
BANNED
Join Date: Feb 2015
Location: East Central Iowa
Posts: 1,275
|
Re: 1931 ccpu
Service Bulletins book.
__________________
Good enough.. Isn't. |
Sponsored Links (Register now to hide all advertisements) |
|
02-14-2018, 12:10 PM | #3 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,756
|
Re: 1931 ccpu
According to the Body Parts List the glass for the 82-B is A-45958
page 250 of the Service Bulletins. Bob |
02-14-2018, 08:34 PM | #4 |
Member
Join Date: Jul 2017
Posts: 43
|
Re: 1931 ccpu
Hey Glenn if you come up with those dimensions let me know! Thanks
|
02-14-2018, 09:21 PM | #5 |
Member
Join Date: May 2010
Location: Carlsbad, CA
Posts: 76
|
Re: 1931 ccpu
You may want to check with local auto glass shops as some may have old patterns lying around.
I had to replace an original drivers window in my 82A CCPU after it broke going down a pothole filled road here in the San Diego area - I called around and an auto glass company up in Anaheim had patterns and they made up one for me which works great - after I figured out - on the 4th try which way it was to be installed - due to the taper. |
02-14-2018, 09:50 PM | #6 |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: 1931 ccpu
Sponsored Links (Register now to hide all advertisements)
http://www.mafca.com/downloads/Servi...p250_Glass.jpg
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 |
02-14-2018, 11:00 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Northern New Jersey
Posts: 1,262
|
Re: 1931 ccpu
Quote:
|
|
02-14-2018, 11:43 PM | #8 | |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: 1931 ccpu
Quote:
For my pickup I just ordered glass from Bert's.....perhaps they would provide the correct dimensions. I couldn't find any other service bulletin pages with glass dimensions.
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 |
|
02-15-2018, 10:36 AM | #9 |
Senior Member
Join Date: May 2010
Location: GA 30809
Posts: 629
|
Re: 1931 ccpu
Page 250 in the Service Bulletins was published in May 1928. Extreme caution should be used when referring to the sizes of glass on that page are being used for later years. Yes, refer to the Body Parts List and cross reference before using the chart for later years.
|
02-15-2018, 11:59 AM | #10 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,756
|
Re: 1931 ccpu
Like I said in my first post the part number for the glass came from the April 1, 1932
Ford Body Parts List and is for the 82-B (mid 1930-31) cab. Even though the glass chart is from 1928 the part number should be correct. Bob |
|
|
Sponsored Links (Register now to hide all advertisements) |
|