The Ford Barn

theodore · 04-09-2013, 05:05 PM

I realize this is a dumb question but how does the universal joint get it's lubrication at the front of the torque tube on my 34 roadster. I am putting it back together after rebuilding the rear end.
Thanks for your help.

Zeke...PA · 04-09-2013, 05:30 PM

Sponsored Links (Register now to hide all advertisements)

Should be a zerk fitting on the bell, pack the joint best you can before assembly especially if no fitting. Most recommend John Deere Corn Head grease. I just did mine this morning, tube of grease $3.52. You can Google it on the web. Zeke

04-09-2013, 05:05 PM	#1
theodore Junior Member Join Date: Aug 2011 Location: Longmont,CO Posts: 23	1934 Ford univeral joint lubrication I realize this is a dumb question but how does the universal joint get it's lubrication at the front of the torque tube on my 34 roadster. I am putting it back together after rebuilding the rear end. Thanks for your help.

04-09-2013, 05:30 PM	#2
Zeke...PA Senior Member Join Date: May 2010 Location: Delta, PA Posts: 525	Re: 1934 Ford univeral joint lubrication Sponsored Links (Register now to hide all advertisements) Should be a zerk fitting on the bell, pack the joint best you can before assembly especially if no fitting. Most recommend John Deere Corn Head grease. I just did mine this morning, tube of grease $3.52. You can Google it on the web. Zeke __________________ Only problem with retirement is never a day off