The Ford Barn

jerry grayson · 10-22-2015, 04:17 PM

At one time I had a template to show drill hole locations for installing 39 pedals in a 35 frame. I can not find it now. Can any one help? Thanks

swoopNZ · 10-22-2015, 04:25 PM

All 39 pass chassis have a mirror image cut out on both sides ( for LHD and RHD )
Just need someone to get under their 39 with a piece of cardboard pressed against the RH side cut out and trace the outline and holes.
I'm too far away - by the time I'd sent it you the job would be done.
Good luck.
Chris.NZ.

JM 35 Sedan · 10-22-2015, 06:23 PM

Jerry, Bob Drake has a template that comes with the '39 repro pedals he sells. I believe Bob or someone else posted a copy of that template here. If you could find that post by doing a search, you could down load that template, size it 1 to 1 and make some copies on your printer.

Here is a post on the same subject. Looks like Richard Lacy, Early V8 Garage, has a template. You could contact him for a copy.
https://www.fordbarn.com/forum/showth...ight=39+pedals

Here is the post I was originally referring to. Includes PDF of Drakes template
https://www.fordbarn.com/forum/showth...ight=39+pedals

Lawson Cox · 10-23-2015, 10:53 AM

Quote:

Originally Posted by jerry grayson

At one time I had a template to show drill hole locations for installing 39 pedals in a 35 frame. I can not find it now. Can any one help? Thanks

Jerry: I have one but I am in Texas for another week. I'll check in with you when I get back in town. Lawson

rich b · 10-23-2015, 07:31 PM

Sponsored Links (Register now to hide all advertisements)

Drake's template, not sure how accurate it is printed out; but a comparison with your pedal assy will let you know if any adjustments are needed. If I remember right it was OK when I added '40 pedals to a '37 frame.

10-22-2015, 04:17 PM	#1
jerry grayson Senior Member Join Date: May 2010 Location: Atlanta area Posts: 833	39 pedal template At one time I had a template to show drill hole locations for installing 39 pedals in a 35 frame. I can not find it now. Can any one help? Thanks

10-22-2015, 04:25 PM	#2
swoopNZ MEMBER EMERITUS Join Date: May 2010 Location: New Zealand Posts: 1,380	Re: 39 pedal template All 39 pass chassis have a mirror image cut out on both sides ( for LHD and RHD ) Just need someone to get under their 39 with a piece of cardboard pressed against the RH side cut out and trace the outline and holes. I'm too far away - by the time I'd sent it you the job would be done. Good luck. Chris.NZ.

10-22-2015, 06:23 PM	#3
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 39 pedal template Jerry, Bob Drake has a template that comes with the '39 repro pedals he sells. I believe Bob or someone else posted a copy of that template here. If you could find that post by doing a search, you could down load that template, size it 1 to 1 and make some copies on your printer. Here is a post on the same subject. Looks like Richard Lacy, Early V8 Garage, has a template. You could contact him for a copy. https://www.fordbarn.com/forum/showth...ight=39+pedals Here is the post I was originally referring to. Includes PDF of Drakes template https://www.fordbarn.com/forum/showth...ight=39+pedals __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 10-22-2015 at 07:34 PM.