The Ford Barn

Motorhead327 · 12-07-2016, 11:28 AM

Can I have some help ID'ing these? I suspect "C" is a ringer because of the phillips head hex bolts, but need confirmation before tossing.
Any help appreciated, thanks in advance.

Bob C · 12-07-2016, 12:06 PM

I think A is to secure the emergency brake cable to the rear backing plate on
hydraulic brakes. B looks like the bracket that bolts to the firewall to hold the
vacuum line for the wiper.

Bob

Tom Wesenberg · 12-07-2016, 12:45 PM

Sponsored Links (Register now to hide all advertisements)

B is also for the electric wiper wire and it holds the kick panel top edge.

12-07-2016, 12:06 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,775	Re: Help identifying brackets I think A is to secure the emergency brake cable to the rear backing plate on hydraulic brakes. B looks like the bracket that bolts to the firewall to hold the vacuum line for the wiper. Bob

12-07-2016, 12:45 PM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Help identifying brackets Sponsored Links (Register now to hide all advertisements) B is also for the electric wiper wire and it holds the kick panel top edge.