|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-28-2011, 01:07 PM | #1 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
351W HO Carb Question
I have an 86 F350 with a 351W HO motor. The motorcraft carb that is on the truck is in bad need of a rebuild. (Part # E6HEGA-B6D28)Unfortunately Ford no longer sells a rebuild kit. Will a Holley 600 or 650 rebuild kit work on this carb? I actually would like to swap over to an Edelbrock performer series carb but I have no idea what to do with the EGR stuff all over the engine. I'm not sure what stays and what goes
|
06-28-2011, 01:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: 351W HO Carb Question
No those kits won't work,that Holley is sort of a freak with the dual vented bowls but Summit has the correct kit:http://cgi.ebay.com/ebaymotors/Holle...Q5fAccessories
|
Sponsored Links (Register now to hide all advertisements) |
|
06-28-2011, 09:55 PM | #3 |
Junior Member
Join Date: Jun 2011
Posts: 22
|
Re: 351W HO Carb Question
I had an '84 351 HO. Parts stores and Ford said they didn't make an HO in '84. Carb had a tag that said built for Motorcraft by Holley. Had a different model number than the '85 and '86. Anyway, if your carb has the tube that runs between the bowls be very careful when assembling it. I must have screwed up an O-ring and had a fire.
Holley had a similar carb with their name on it. I have one somewhere. Could be the Holley kit would work. |
06-30-2011, 09:11 PM | #4 |
Member
Join Date: May 2010
Location: Port Orchard, WA
Posts: 67
|
Re: 351W HO Carb Question
Daytona Parts should be able to supply a kit if you want to rebuild it. Ask for Gina...super nice folks.
|
07-01-2011, 08:56 AM | #5 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: 351W HO Carb Question
After much debate I decided to track down a rebuild kit for the stock carb. One of the guys I work with is a carb rebuild master so the kit and the carb will soon be in his hands. At this point I just need to get this thing running and out of my driveway
|
07-03-2011, 09:45 AM | #6 |
Senior Member
Join Date: May 2010
Location: dayton Ohio
Posts: 243
|
Re: 351W HO Carb Question
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|