The Ford Barn

8350 · 08-27-2014, 06:10 AM

I have a 1940 Ford with 289/302 engine. Wondering what kind of exhaust manifoilld /headers will fit (problem is on driver side) ?

51504bat · 08-27-2014, 01:29 PM

You might get a better response over on the H.A.M.B.

sanborn · 08-27-2014, 05:24 PM

I used a pair of 65 289 exhaust manifolds. It is helpful if you can raise the engine about 1". The exhaust pipe will need to be only 1.5" in diameter. Or even better if you can oval shape the exhaust pipe.

I ended building a set of stainless headers during my rebuild of the car----that solve all the problems.

steve fritz · 08-27-2014, 06:31 PM

Sponsored Links (Register now to hide all advertisements)

I am presently building a 40 Ford coup with 302 and C4. I have fit in a 302 block to see what exhaust to use. I used a pair of stock Ford exhaust manifolds and they fit very nicely. The left side is perfect, the right side will come out OK , but I may have to tweek the frame opening on that side, not much , about 1/2 inch.
email me at [email protected] and I can give you the part numbers for the manifolds, I can dig up the receipt for them, send you a picture of them if you want it.
Steve

08-27-2014, 06:10 AM	#1
8350 Junior Member Join Date: Jul 2012 Location: Norway Posts: 10	40 Ford Headers I have a 1940 Ford with 289/302 engine. Wondering what kind of exhaust manifoilld /headers will fit (problem is on driver side) ?

08-27-2014, 01:29 PM	#2
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,025	Re: 40 Ford Headers You might get a better response over on the H.A.M.B. __________________ Making the simple complicated for over 30 years.

08-27-2014, 05:24 PM	#3
sanborn Senior Member Join Date: Jul 2010 Location: Shelbyville TN Posts: 174	Re: 40 Ford Headers I used a pair of 65 289 exhaust manifolds. It is helpful if you can raise the engine about 1". The exhaust pipe will need to be only 1.5" in diameter. Or even better if you can oval shape the exhaust pipe. I ended building a set of stainless headers during my rebuild of the car----that solve all the problems.

08-27-2014, 06:31 PM	#4
steve fritz Senior Member Join Date: May 2010 Location: onalaska , wisconsin Posts: 535	Re: 40 Ford Headers Sponsored Links (Register now to hide all advertisements) I am presently building a 40 Ford coup with 302 and C4. I have fit in a 302 block to see what exhaust to use. I used a pair of stock Ford exhaust manifolds and they fit very nicely. The left side is perfect, the right side will come out OK , but I may have to tweek the frame opening on that side, not much , about 1/2 inch. email me at [email protected] and I can give you the part numbers for the manifolds, I can dig up the receipt for them, send you a picture of them if you want it. Steve