The Ford Barn

BNewman · 02-19-2019, 01:00 PM

Does anyone have any experience with the Eaton Company in Detroit for springs? Or any other company?
I am looking to replace the front spring on my '37 coupe.
Thanks

19Fordy · 02-19-2019, 01:08 PM

I've heard Eaton is an excellent company with an excellent product. Also. check out Posie. Be sure the springs is the same width as your OEM spring, Also, buy new shackles.
http://www.posiesrodsandcustoms.com/...35_48_springs/

JSeery · 02-19-2019, 03:02 PM

I have always had them made local. Normally a 1 or 2 day deal and no shipping.

BNewman · 02-19-2019, 03:59 PM

thanks

Scott H in Wheaton · 02-19-2019, 06:01 PM

Eaton Detroit Spring is dedicated to making springs to OE specs. For example, many early Mustang parts houses show 1 leaf spring part number for 65-67, but Eaton has all the variables for coupe, conv, fastback, GT, non GT, v8, 6 cyl, etc.

Hyfire · 02-19-2019, 06:36 PM

Sponsored Links (Register now to hide all advertisements)

I've bought two sets of springs from Eaton. Make sure you order over the telephone, because some applications need additional hardware replaced as well. They can let you know up front.

Great quality product. They take a little time, but worth it.

Zeke3 · 02-19-2019, 08:54 PM

Send a PM to kandrews70 to see if she still has a NOS front spring.

BNewman · 02-20-2019, 11:20 AM

Quote:

Originally Posted by Zeke3

Send a PM to kandrews70 to see if she still has a NOS front spring.

OK. How would I contact her?

Zeke3 · 02-20-2019, 09:07 PM

Use the Private Message feature in the upper right of the screen under your username. Address the message to her username.

35fordtn · 02-20-2019, 09:30 PM

As a small tid but I have a Eaton 33/34 rear spring. It was very expensive but it is spot on!

cas3 · 02-20-2019, 10:19 PM

i would imagine a 32-34 rear spring would be very expensive to have made due to the double curve. i'll bet they could hardly figure out how to do it !

BNewman · 02-22-2019, 01:19 PM

Quote:

Originally Posted by BNewman

OK. How would I contact her?

Zeke3 Thank you for the tip on Kathy Andrews. I purchased the spring I needed from her today.
Best regards, Bob

Zeke3 · 02-22-2019, 02:04 PM

Glad to help, I bought one from her also.

Zeke

02-19-2019, 01:00 PM	#1
BNewman Member Join Date: Sep 2015 Posts: 30	New OEM-style Suspension Springs Does anyone have any experience with the Eaton Company in Detroit for springs? Or any other company? I am looking to replace the front spring on my '37 coupe. Thanks

02-19-2019, 01:08 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,951	Re: New OEM-style Suspension Springs I've heard Eaton is an excellent company with an excellent product. Also. check out Posie. Be sure the springs is the same width as your OEM spring, Also, buy new shackles. http://www.posiesrodsandcustoms.com/...35_48_springs/

02-19-2019, 03:02 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: New OEM-style Suspension Springs I have always had them made local. Normally a 1 or 2 day deal and no shipping. Last edited by JSeery; 02-19-2019 at 04:49 PM.

02-19-2019, 03:59 PM	#4
BNewman Member Join Date: Sep 2015 Posts: 30	Re: New OEM-style Suspension Springs thanks

02-19-2019, 06:01 PM	#5
Scott H in Wheaton Senior Member Join Date: Dec 2012 Location: Wheaton, IL near Chicago Posts: 861	Re: New OEM-style Suspension Springs Eaton Detroit Spring is dedicated to making springs to OE specs. For example, many early Mustang parts houses show 1 leaf spring part number for 65-67, but Eaton has all the variables for coupe, conv, fastback, GT, non GT, v8, 6 cyl, etc.

02-19-2019, 06:36 PM	#6
Hyfire Junior Member Join Date: May 2010 Location: Cucamonga, CA Posts: 21	Re: New OEM-style Suspension Springs Sponsored Links (Register now to hide all advertisements) I've bought two sets of springs from Eaton. Make sure you order over the telephone, because some applications need additional hardware replaced as well. They can let you know up front. Great quality product. They take a little time, but worth it.

02-19-2019, 08:54 PM	#7
Zeke3 Senior Member Join Date: Dec 2014 Location: Columbus, IN Posts: 1,407	Re: New OEM-style Suspension Springs Send a PM to kandrews70 to see if she still has a NOS front spring.

02-20-2019, 09:07 PM	#9
Zeke3 Senior Member Join Date: Dec 2014 Location: Columbus, IN Posts: 1,407	Re: New OEM-style Suspension Springs Use the Private Message feature in the upper right of the screen under your username. Address the message to her username.

02-20-2019, 09:30 PM	#10
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,327	Re: New OEM-style Suspension Springs As a small tid but I have a Eaton 33/34 rear spring. It was very expensive but it is spot on!

02-20-2019, 10:19 PM	#11
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,578	Re: New OEM-style Suspension Springs i would imagine a 32-34 rear spring would be very expensive to have made due to the double curve. i'll bet they could hardly figure out how to do it !

02-22-2019, 02:04 PM	#13
Zeke3 Senior Member Join Date: Dec 2014 Location: Columbus, IN Posts: 1,407	Re: New OEM-style Suspension Springs Glad to help, I bought one from her also. Zeke