The Ford Barn

TinCup · 08-26-2011, 09:23 PM

I picked up nice used pop out. With the small cable and a standard switch it's pretty easy to install on my 31. With the stiff cable what's the best way to install. Do you install into the distributor first the try to mount to the dash. The cable doesn't want to twist like the small cable can.

MCHinson · 08-26-2011, 09:26 PM

Sponsored Links (Register now to hide all advertisements)

Install it in the dash first. The secret is to remove the distributor from the engine. Then you can thread the ignition cable into the distributor. Then you can reinstall the distributor.

08-26-2011, 09:23 PM	#1
TinCup Senior Member Join Date: May 2010 Location: OKC / Tonkawa, Ok. Posts: 1,977	Repro Pop Out I picked up nice used pop out. With the small cable and a standard switch it's pretty easy to install on my 31. With the stiff cable what's the best way to install. Do you install into the distributor first the try to mount to the dash. The cable doesn't want to twist like the small cable can. __________________ Oklahoma City Model A Restorers Group.

08-26-2011, 09:26 PM	#2
MCHinson Senior Member Join Date: Jul 2010 Location: Wilmington, NC Posts: 401	Re: Repro Pop Out Sponsored Links (Register now to hide all advertisements) Install it in the dash first. The secret is to remove the distributor from the engine. Then you can thread the ignition cable into the distributor. Then you can reinstall the distributor.