11-22-2014, 11:54 AM | #1 |
Senior Member
Join Date: May 2010
Location: At my kitchen table in Santa Rosa, Ca
Posts: 2,904
|
wiper blade
__________________
If it would have been a snake it would have bit ya! i can't spell my way out of a paper bag! |
11-23-2014, 05:32 AM | #2 |
Senior Member
Join Date: May 2010
Location: N. Ft. Myers, Fl.
Posts: 502
|
Re: wiper blade
resize the photo. Can't tell anything like it is
|
Sponsored Links (Register now to hide all advertisements) |
|
11-23-2014, 06:22 AM | #3 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,081
|
Re: wiper blade
Brendan, That wiper blade is from 1970s period. Trico was one company that made them. Not correct type for early Fords. Regards, Kevin.
|
11-23-2014, 10:29 AM | #4 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,042
|
Re: wiper blade
Brenden, if the blade uses an insert type rubber blade you can get the inserts at your local Walmart. They will be too long, but you can cut them and get two inserts for the price of one. I've done that using the same arm you are using.
|
11-23-2014, 10:53 AM | #5 |
Senior Member
Join Date: May 2010
Location: At my kitchen table in Santa Rosa, Ca
Posts: 2,904
|
Re: wiper blade
its very narrow, any idea what year the arm is from? its for my Model A, the A has a Bosh 12 volt motor on it . I have seen a wiper arm like it before but I don't know where
__________________
If it would have been a snake it would have bit ya! i can't spell my way out of a paper bag! Last edited by Brendan; 11-23-2014 at 11:01 AM. |
11-23-2014, 11:28 AM | #6 |
Senior Member
Join Date: Nov 2010
Location: NM
Posts: 2,438
|
Re: wiper blade
Sponsored Links (Register now to hide all advertisements)
__________________
'52 F-1, EAB flathead |
11-23-2014, 12:30 PM | #7 |
Senior Member
Join Date: May 2010
Location: At my kitchen table in Santa Rosa, Ca
Posts: 2,904
|
Re: wiper blade
Thanks , I thought it was a early 50s ford
__________________
If it would have been a snake it would have bit ya! i can't spell my way out of a paper bag! |
11-23-2014, 01:17 PM | #8 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: wiper blade
Believe you are correct. This is the original wiper arm and replacement blade ( made to use two different arm configurations) on my '51 Merc.
12 inch replacement blade is Trico 33-122
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 11-23-2014 at 01:43 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|